Войти:
Оценок - 3, средний балл: 4.3 ( )

Инструкция по эксплуатации Transition Networks, модель CPSFM-200

Производитель: Transition Networks
Размер: 84.29 kb
Название файла: bd36f112-5022-de54-e9a2-c7e62a9e822b.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


The CPSFM-200 may be installed in either the AC-powered or the DC-powered, 18-slot or 19-slot, PointSystem™ chassis. The drawing below shows the CPSFM200 installed in the back of a AC-powered PointSystem™ chassis. 0 CPSFM-200 Fan Module AC-Powered PointSystem Chassis NOTE: The CPSFM-200 fan module is required in PointSystem™ applications where the ambient temperatures approach 60°C. Installation . . . . . . . . . . . . . . . .2 Technical Specifications . . . . . .3 Contact Us . . . . . . . . . . . . . . . .3 Compliance Information . . . . . .4 CPSFM- Installation NOTE: The CPSFM-200 fan the chassis while the chassis To install the CPSFM-200 fan CPSMC19xx-100 PointSystem™ chassis: 1. Remove and retain the two (2) screws the chassis. 2. Pull the plate away from the chassis. 3. Carefully slide the fan module into the installation slot, aligning the module with the installation guides. 4. Ensure that the fan module is firmly seated inside the chassis. 5. Carefully install the two (2) screws (retained in step 1) through the fan module and into the chassis, rotating clockwise to secure. 6. Verify that the fan module is powered by observing the fan operation. Tech Support: 1-800-260-1312 -- International: 00-1-952-941-7600 -- (24 hours) Technical Specification For use with Transition Standards FCC & CISPR Class A&Dimensions 8.3" x 8.4" x 2.7" (211 mm Weight 1 lb. (0.45 kg) (approximate) Power Consumption 4.5 watts MTBF 145,000 hours (MIL217F2 V5.0) (MIL- 639,000 hours (Bellcore7 V5.0) Environment Tmra*: 0 to 60°C (32 to 140°F ) Storage Temperature: -20 to 85°C (-4 to 185°F) Humidity: 5 to 95%, non condensing Altitude: 0 to 10,000 feet Warranty Lifetime *Manufacturer’s rated ambient temperature: Tmra range for this fan module depends on the physical characteristics and the installation configuration Transition Networks PointSystem™ chassis in which this module will be installed. Contact Us Technical Support Technical support is available 24 hours a day. US and Canada: 1-800-260-1312 International: 00-1-952-941-7600 Transition Now Chat live via the Web with Transition Networks Technical Support. Log onto and click the Transition Now link. Web-Based Seminars Transition Networks provides seminars via live web-based training. Log onto and click the Learning Center link. E-Mail Ask a question anytime by sending an e-mail to our technical support staff. techsupport@transition.com Address Transition Networks 6475 City West Parkway Minneapolis, MN 55344, USA telephone: 952-941-7600 toll free: 800-526-9267 fax: 952-941-2322 techsupport@transition.com -- Click the “Transition Now” link for a live Web chat. Compliance CISPR22/EN55022 CE Mark FCC Regulations This equipment has been tested device, pursuant to part 15 of the These limits are designed to provide reasonable protection against harmful commercial environment. This equipment generates, uses, and energy and, if not installed and used in harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in the interference at the user's own expense. Canadian Regulations This digital apparatus does not exceed the Class A&B apparatus set out on the radio interference regulations of Communications. Le present appareil numerique n'emet pas de bruits radioelectriques applicables aux appareils numeriques de la Class A&B prescrites brouillage radioelectrique edicte par le ministere des Communications Declaration of Conformity Name of Mfg: Model: Part Number(s): Regulation: Transition Networks 6475 City West Parkway, Minneapolis MN 55344 USA CPSFM-200 Fan Module CPSFM-200 EMC Directive 89/336/EEC Purpose: To declare that the CPSFM-200to which this declaration refers is in conformity with the following standards. CISPR 22: 1993; EN 55022:1998 Class A&B; EN 55024:1998 I, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s) and Standard(s). _ July 8, 2000_____ Date Stephen Anderson, Vice-President of Engineering Trademark Notice All trademarks and registered trademarks are the property of their respective owners. Copyright Restrictions © 2000, 2004-2005 Transition Networks. All rights reserved. No part of this work may be reproduced or used in any form or means (graphic, electronic, mechanical) without written permission from Transition Networks. Printed in the U.S.A. 33193.C ...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории