Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Via USB Cable 1. Connect to the device. 2. Power on your device. 3. The OS detects and recognizes new hardware and finishes the installation automatically. NOTE: If the system does not launch installation automatically, you can run the installation program in path of My Computer > ZTEMODEM. 4. Wait a moment, and then the client will connect to your device successfully. Accessing the Internet 3G Mode After the client connected to your device successfully, you can access the Internet in the Automatic or Manual mode. The default mode is Automatic. Mode Operations Automatic Your device will connect to the Internet automatically, and your clients can surf on the Internet directly. Manual Log in the webGUI configuration page, and select Settings > 3G Settings > Network Select > WAN Connection Mode > Manual, and then click Connect or Disconnect. NOTE: If you want to modify the detailed parameters of your device, please log in the webGUI configuration page by visiting or The default password is admin. AP Station Mode 1. Log in the webGUI configuration page. 2. Select Settings > AP Setting. 3. Set the WLAN and WLAN mode, and then click Apply. NOTE: You need to set the WLAN On and select Wi-Fi Prior. 4. Connect to the WLAN device. There are two methods for your reference. u Input the WLAN device information in the WLAN Setting area, and then click Apply. u Click More, select this WLAN device which will be listed, and then click Connect. 5. After the client connected to the WLAN device successfully, you can access the Internet. Configuring Your PC Follow the following steps and figures for Windows XP to configure the Internet Protocol for your Wi-Fi connection. 1. Right-click My Network Places, and then select Properties. 2. Right-click Wireless Network Connection, and then select Properties. 3. Select Internet Protocol(TCP/IP), and then click Properties. 4. Select Obtain an IP address automatically and Obtain DNS server address automatically, and then click OK to finish the configuration. Warning and Notice To the Owner • Some electronic devices are susceptible to electromagnetic interference sent by your device if inadequately shielded, such as the electronic system of vehicles. Please consult the manufacturer of your device before using if necessary. • Operating your device may interfere with medical devices like hearing aids and pacemakers. Please always keep them more than 20 centimeters away from such medical devices when they are turned on. Turn your device off if necessary. Consult a physician or the manufacturer of the medical device before using your device. • Be aware of the usage limitation when using your device at places such as oil warehouses or chemical factories, where there are explosive gases or explosive products being processed. Turn off your device if required. • The use of electronic transmitting devices is forbidden in aircrafts, at petrol ...