Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Mac OS X, don’t support WPS. If your device doesn’t support WPS, go to step 6. 6. On the device that you want to connect to your JT Hotspot, choose the ‘JT_xxxxxx’ SSID and click Connect. The connection manager will look something like this: 7. Enter the Wi-Fi key, then click Connect. The Wi-Fi key can be found on the box or on a sticker under the battery. 8. Wait a few moments and you’ll see a message that you’re connected. Connecting via USB cable 1. Connect your JT Hotspot to a device using a compatible USB cable. 2. Turn on your JT Hotspot by pressing the power button for around five seconds. It’ll take a few moments to start up, then the Wi-Fi LED will glow blue and the network LED will glow green. 3. Your device should recognise and automatically install the new hardware. If it doesn’t, in Windows, run the installation from My Computer > ZTEMODEM (other operating systems may vary). 4. Wait a few moments until you’re connected. 10 Viewing and changing your JT Hotspot settings To view or change your JT Hotspot’s settings, access the configuration page by entering or in your web browser. The default password is admin. Automatic or manual connection Once you’ve connected your device to the JT Hotspot (see above) you can access the internet in either Automatic or Manual mode. Mode How to get online Automatic Your device will connect to the internet automatically. This is the default setting Manual To manually connect and disconnect, log in at the JT Hotspot configuration page (see above) and select Settings > 3G Settings > Network Select > WAN Connection Mode > Manual, and then click Connect or Disconnect 11 Troubleshooting Can’t set up the USB connection between your device and PC • Make sure you’ve installed the software. Run the installation program at My Computer > ZTEMODEM. • You might need to uninstall the software, then reinstall it using the instructions above. Can’t set up the Wi-Fi connection with your JT Hotspot • Make sure Wi-Fi on your computer is turned on. • Refresh the network list and select the ‘JT_xxxxxx’ network. • Make sure you’ve entered the right Wi-Fi key when you connect to the device. You’ll find it on the box or on a sticker under the battery in the JT Hotspot. Can’t get online when connected to the JT Hotspot • Make sure your SIM card is active. If the network indicator is red, see the lights table on page 4. • Move your JT Hotspot to see if you can get a better signal. 12 Can’t get to the JT Hotspot configuration page • Check you’ve entered the right address in your web browser. Either or • Use only one network adapter in your PC. • Don’t use a proxy server. Wi-Fi key • You’ll find the Wi-Fi key for your JT Hotspot on the box or on a label under its battery. • If you’ve changed the Wi-Fi key, and forgotten it, you need to restore the factory default settings. To do that, log in to the JT Mobile Hotspot configuration page, select Settings ...