Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
• u• PPPoE mode NOTE: Your service provider does not give you any parameters. NOTES: Protocol for your connection. Select PPPoE, input the User Name and Password and then set the Accessing the Internet WAN Connection Mode. • Wireless Network Connection is used for Wi-Fi connection. Before accessing the Internet, please make sure that the following operations NOTE: Your service provider gives you the User Name and Password. • Local Area Connection is used for network cable connection. are finished. 1. Right-click My Network Places, and then select Properties. • Your device is connected via a network cable or Wi-Fi. • Your PC is configured. LEGAL INFORMATION NOTE: If you change the operation mode, the device will be restarted auto •• For Wireless Broadband Copyright © 2013 ZTE CORPORATION. To access the Internet: matically. If you want to use your PC to connect to the Internet, please connect your PC All rights reserved. 1. Log in the 4G CPE Page. 4. Set the detail parameters for the operation mode. No part of this publication may be excerpted, reproduced, translated or utilized in any to the LAN port via Ethernet cable. 1) Launch the Internet browser and enter in the ad • For Bridge form or by any means, electronic or mechanical, including photocopying and micro- Select Settings > Network Settings > Dial-up Settings to change the WAN dress bar. The login page appears. film, without the prior written permission of ZTE Corporation. You need to connect the WAN to the LAN port via Ethernet cable and set connection mode. The default WAN Connection Mode is Automatic. The manual is published by ZTE Corporation. We reserve the right to make modifica the clients to obtain the IP address automatically. Your clients can obtain tions on print errors or update specifications without prior notice. the IP address from the WAN DHCP host and connect to the Internet di 4. Select the two items indicated in the following figures, and then click OK to • u• Static mode Version No. : R1.0 rectly. finish the configuration. Select Static, input all the parameters and then click Apply. ZTE CORPORATION NOTE: Your service provider gives you the static address information. NO. 55, Hi-tech Road South, ShenZhen, P.R.China Postcode: 518057 5. Begin to enjoy your Internet service. 4. Enable the WPS function on your client to respond to this authentication 3. Select the SSID of your device, and then click Connect. The download or upload speed is very slow. The speed is dependent on signal strength. Check your signal strength and network type. • Enter the correct address. The default address is I cannot visit the 4G CPE page • Only use one network adapter in your PC. • Do not use any proxy server. • Make sure the Wi-Fi function is active. I cannot establish the Wi-Fi connection between my device and the client. • Refresh network list and select the correct SSID. • Check the IP address to make sure your client c...
Эта инструкция также подходит к моделям:Компьютерные аксессуары - MF253(Vodacom) (898.66 kb)
Компьютерные аксессуары - MF253(Mobile Interim Company 1 S.A.L) (898.66 kb)