Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
It will take 1~2 minutes to initialize. . Use your normal Wi-Fi application on the client to search for the available wireless networks. NOTE: Please set the client to obtain an IP address automatically re ferring to the chapter “Configuring your PC”, and then the client will get an IP address like “192.168.0.100”. . Select the SSID of your device, and then click Connect. NOTE: Please check the label on your device to get the default SSID. 4. Input the password, and then click Connect. NOTE: You may need to input the password for Wi-Fi connection, and then please check the label on your device to get the default. 0 5. Wait a moment, and then the client will connect to your device successfully. Via USB Cable . Connect to the device. 2. Power on your device. 3. The OS detects and recognizes new hardware and finishes the installation automatically. NOTE: If the system does not launch installation automatically, you can run the installation program in path of My Computer > SMART BRO. 4. Wait a moment, and then the client will connect to your device successfully. Accessing the Internet 3G Mode After the client connected to your device successfully, you can access the Internet in the Automatic or Manual mode. The default mode is Automatic. Mode Operations Automatic Your device will connect to the Internet automatically, and your clients can surf on the Internet directly. Manual 1. Log in the webGUI configuration page. . Select Settings > Network Settings > Dialup Settings > Manual, and then click Apply. . Select Home, and then click Connect or Disconnect. NOTE: If you want to modify the detailed parameters of your device, please log in the webGUI configuration page by visiting or The default password is smartbro. AP Station Mode 1. Log in the webGUI configuration page. . Select Settings > Internet Wi-Fi. . Set the Internet Wi-Fi Switch and Preferred Network, and then click Apply. NOTE: You need to set the Wi-Fi Enable and select Wi-Fi. 4. Connect to the Wi-Fi Hotspot. There are two methods for your reference. • Input the Wi-Fi Hotspot information in the Add Wi-Fi Hotspot area, and then click Apply. • Select this Wi-Fi Hotspot which will be listed, input the Pass Phrase and click Apply. 5. After the client connected to the Wi-Fi Hotspot successfully, you can access the Internet. Configuring Your PC Follow the following steps and figures for Windows XP to configure the Internet Protocol for your Wi-Fi connection. . Right-click My Network Places, and then select Properties. 4 . Right-click Wireless Network Connection, and then select Properties. 5 . Select Internet Protocol(TCP/IP), and then click Properties. 4. Select Obtain an IP address automatically and Obtain DNS server address automatically, and then click OK to finish the configuration. 6 Warning and Notice To the Owner • Some electronic devices are susceptible to electromagnetic interference sent by your device if inadequately shielded, such...