Ordinary Operation • WPS Summary: Shows the WPS function status. • Click button to reset the settings. • WPS mode: Select PBC or PIN WPS mode. • PIN: There are two ways to use PIN mode, one is set PIN code on the client’s wireless adapter (you can find the PIN code in AP PIN field of WPS Summary), and the other way is set the client’s PIN code in Client PIN field. • PBC: Press the WPS button of the router or select PBC, and then click . Press WPS button on the client wireless adapter within two minutes, and the negotiation process will be established. • Client PIN: Enter the PIN code from the registrar or enrollee. • Click to save and apply the current settings. • WPS Status: Shows the current status of the WPS function. Note:When the security mode is SHARED or Open, you can not use WPS connection. 5.7 Firewall 5.7.1 Mac/Ip/Port Filtering After access MODEM setup page successfully, please click Firewall . Mac/Ip/Port Filtering link to access the following screen: Ordinary Operation 45 If you select Enable, the filter settings will appear: 46 Ordinary Operation • Default Policy: Set how to handle the packet if none of the rules matches. • MAC address: Set the MAC address that will be filtered. • Dest IP Address: Set the destination IP address that will be filtered. • Source IP Address: Set the source IP address that will be filtered. • Protocol: Set which protocol will be used for filtering. • Dest Port Range: Set the destination port numbers that will be filtered • Source Port Range: Set the source port numbers that will be filtered. • Action: Set how to handle the packet if it matches with the rule. • Comment: Type comment for the filter settings. Note:Filtering rules are matched one by one, if met this provision, it will not continue to match the rules listed below. Click to confirm your configuration. Click to delete the rule which you selected. Click to clear what you select or input. To add a new rule: a ) Select Enable and click in the Basic Settings area. b) Input the detail information in the Mac/Ip/Port Filtering area. c ) Click in the Mac/Ip/Port Filtering area. Ordinary Operation 47 5.7.2 URL Filter After access MODEM setup page successfully, please click Firewall . URL Filter link to access the following screen: Type URL address, and then click to add the URL address into the filtering list. The new URL filtering item will be shown in the Current URL Filter field. Click to delete the rule which you selected. Click to clear what you select or input. 48 Ordinary Operation 5.7.3 Time Filtering Aft...
Войти: