Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
To send an SMS Click New at the left-hand end of the SMS toolbar to create a new SMS text message. Address Enter the recipients here, or choose them from Contacts Message Write your message here Send Click on the Send button to send your message. After your SMS has been sent, it will be stored in the Sent list. 1 2 3 The number displayed to the person who receives your message will be from your data SIM, not your mobile phone. Use a short ‘signature’ to make sure people know you sent them a message: Settings/Messages/ Signature. 1 2 3 Receiving SMS When you receive a new message, an SMS Notification is shown briefly so you can respond to it directly. The received message can also be read from the Inbox in the main SMS window. The SMS application will receive text messages whenever you have mobile network coverage. SMS Contacts Click Contacts on the SMS navigation bar to open the Contacts list, in which you can save SMS numbers that you use frequently as contacts with names. New SMS Contact Clicking the New button on the SMS toolbar opens a new contact window. On Mac OS X, contacts are saved in the OS X Address Book application. Enter the name and number of your contact using the international format for the number, eg. +447774477000. USB Stick LED lights The LED light on your USB Stick shows which kind of mobile network has been found, and whether the USB Stick is connected to that network. Green blinking A GPRS network has been found – you could connect Green solid Connected via GPRS Blue blinking A 3G network has been found – you could connect Blue solid Connected via 3G Light blue blinking A 3G Broadband network has been found - you could connect Light blue solid Connected via 3G Broadband. The strength of the mobile or Wi-Fi network signal is shown by the symbol to the left of the Connect button, and by the icon in the Windows Notification area. The more bars that are filled in, the better the signal quality. At least one bar must be filled in order to connect. Light blue blinking indication may not appear on some networks (even where 3G Broadband is available). You will still be able to connect to the 3G Broadband network. Signal strength Hints and tips If you don’t see your USB Stick in the list of devices ––Remove the USB Stick ––Re-start your computer ––Re-insert the USB Stick. If no network can be found ––Change your physical location: in a building, move closer to a window, move higher up, or go outside ––(Windows) Open the Advanced window, open the ‘Priorities’ view, click ‘Mobile’ in the ‘Select Network’ group on the Ribbon, and see if you can connect to one of the networks listed ––(Mac) Select ‘Connections’, open ‘Mobile Connections’, click ‘Select Networks’ and see if you can connect to one of the networks listed ––Contact Support, and check that data services and roaming are enabled on your account. If no connection can be opened ––Wait a few minutes and try to connect again. This is most often a temporary prob...