Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
With this modem, you can access our wireless network with high speed. Modem Specifications The following table shows the specifications of your device. Interface Type USB 2.0 High Speed Operating systems supported Windows XP, Vista, Windows 7 MAC 10.4, 10.5, 10.6 Modem Specifications continued Interface Type USB 2.0 High Speed Functions SMS service, Data service, Applications management, support microSD card, etc. Network Standards H SU PA/ HS DPA/ W C DMA /E DG E/ GP RS/ GSM Transmission speed (Max) HSUPA: 5.76Mbps UL HSDPA: 7.2Mbps DL Light Indicators Color Status Explanation Green Blinking twice every 3s Modem is powered ON Green Blinking once every 3s Modem is registering on the 2G network Light Indicators continued orsColor Status Explanation Blue Blinking once every 3s Modem is registering on the 3G/3.5G network. Green Always ON Modem is powered on the 2G Blue Always ON Modem is powered on the 3G/3.5G network. Hardware Installation: Step A. Inserting the sim card in the modem. 1. Put your finger on the bottom finger grip, and then lift the front cover of the modem to release and remove. Note: Do not use force to open the front cover so as to avoid damaging it. 2. Insert the SIM card into the SIM card slot. Insert the SIM card with the metal contact area facing downwards into the slot, and then push SIM card as far as possible, shown as the following picture. 2. Insert the SIM card into the SIM card slot. Insert the SIM card with the metal contact area facing downwards into the slot, and then push SIM card as far as possible, shown as the following picture. 3. How to Insert the microSD card into the microSD card slot. Note: This modem only supports microSD cards. Insert your microSD card into the microSD card slot, shown as the following picture. 4. Put the front cover of the modem flatly upon the body of modem. Direct the front cover towards the locking catches on the sides of the modem and push the front cover of the modem to lock the front cover into its place. Press gently until you hear a click. Step B. Connecting your Modem to your laptop or desktop. Plug the USB connector into your computer’s USB port and make sure that it is tightly inserted. The OS automatically detects and recognizes new hardware and starts the installation wizard. Software Installation Guide On different operating systems, the installation procedures may be different. Follow the system prompts during operation. For Windows OS. 1. Your system will start the software setup process automatically when you connect the modem to your computer correctly. Follow the system prompts to complete the software installation. 2. If the system does not launch installation automatically, you can run the installation program manually from the path of My Computer > MTNMODEM. 3. Below are exact screenshots you will get while installing your modem Click on OK to start the installation. Click on Next to run the...