Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Insert the SIM card into the SIM card holder. Inserting microSD Card Interface and Buttons Introduction 1. Power Hold the Power button to switch on/off the device. 2. Memory card slot (microSD card) It is where you insert the memory card (microSD card). 3. WPS This button is used to start/end Wi-Fi Protected Setup authentication process and enable/disable the Wi-Fi function. • Hold it for 3 seconds to activate the WPS function. • When the WPS function is available, press it to deactivate the WPS function. • Press it to enable/disable Wi-Fi function. 4. LED Screen It indicates the signal type, signal strength, battery, Wi-Fi, etc. 5. External Antenna It is used to connect an external antenna to Connector enhance the signal strength. 6. Charger/USB port • Charge your device. • Connect the client to your device via USB cable. Working Mode Icon Indication Network signal strength. Network type. 2G or 3G icon will appear on the LED screen according to the network being connected. Connect to the Internet automatically. Connect to the Internet manually. Roaming network indication. New message received. Wi-Fi Status and number of the connecting users. Battery power indication. 1. Pull the microSD cover out of the card slot. ZTE MF60 is a 3G/2G mobile hotspot device, working in GSM/GPRS/ Notes: Your device supports three working modes. For the client, we only use PC or EDGE/WCDMA/HSPA/HSPA+ network. The client devices could connect to Do not pull the cover rudely, as it is connected with the device. laptop as the example in this document. it via USB or Wi-Fi interface. The device supports data and SMS services, 2. Insert the microSD card into the microSD slot. The following picture USB Mode: Connect to the device with the USB cable. enabling you to communicate anytime and anywhere. shows the correct inserting direction. You will hear a click when the This manual provides instructions on how to install and get started with the microSD card locks in place. product. For information about connection of services, please consult your ZTE MF60 service provider. User Manual Specification Establish a connection between your device and Data Service HSPA+: DL 21.6Mbps, UL 5.76Mbps WCDMA CS: 64kbps UL/DL WCDMA PS: 384kbps UL/DL Interface USB and Wi-Fi Wi-Fi Standard 802.11b/g Wi-Fi Security WEP/WPA/WPA2 USB Version USB 2.0 HIGH SPEED USB Interface Type Micro USB Weight 86g Dimensions (W.H.D): 99.6mm*54mm*14.6mm microSD card Support up to 32GB microSD card Power Adapter 5V/700mA Battery 1500mAh *Standby time 100hours 3. Insert the battery as shown with the contacts located against the metal the client spri...