Connecting with External Power Connect the external power adaptor to a standard power outlet. Insert the plug into the socket at the rear of the router. Switching on Your Device 1. Turn the power switch on to get started. Make sure that the phone is on hook before power on. Notes: Do not put anything on the top of the router. Do not lay routers to overlap each other when using. 2. Wait 1 ~ 2 minutes after turning the router on before you use the service. The 3G & POWER indicator should be lit on. Notes: When the router is turned off, an incoming caller will hear the prompt like “The number you have dialed is currently unavailable.” If the 3G LED is blinking constantly, try to move the router to another location. The router takes 1~2 minutes to initialize, attach to the network and obtain an IP address. Power Supply For normal operation, connect the router to the external power adapter. In case of power failure or when there is no available external power supply, the router will not work. Voice Making a Call You have two ways to make a call: • Through (U)SIM card. • Through PSTN. To make a call: 1. Pick up the handset. 2. Key in the telephone number. 3. You can either press # key on the telephone to send the call, or wait 4 ~ 8 seconds for the call to be connected automatically. 4. Call will be connected. Notes: If there is no 3G indication, the RF signal is unavailable. Change the location of the router and make sure nothing is blocking it. Making a Trunk Call If you are making a trunk call, add the area code as normal. E.g. 03 9612 3456 Making an International Call If you are making an international call, key in the international access code followed by the country code, area code and number. E.g. 00 11 64 12 345678 Answering a Call When the phone rings, pick up the handset to answer it. If the telephone has hands-free function you also can answer the call by pressing the Hands-free button. Press the Hands-free button again to end the call. Internet Access The router does not require any drivers, and it supports all operating systems with Ethernet LAN capability, such as Windows 2000, XP, Vista, MAC OS X and Linux. Note: All the parameter settings in this chapter are just for your reference. Please contact your service provider for detail. Preparation Establishing a connection between your device and the client Via RJ45 Ethernet cable 1. Connect your device and the client with the RJ45 Ethernet cable. 2. Power on your device. The connection between your device and the client will be established successfully a moment later. Via Wi-Fi 1. Power on your device directly. It will take 1~2 minutes to initialize, and then Wi-Fi LED is blinking. 2. Use your normal Wi-Fi application on the client to search the available wireless network. Notes: You need to check your Wireless Network Connection. Set the client to obtain an IP address automatically in the Internet protocol (TCP/IP) properties, and the client will get an IP ad...

Эта инструкция также подходит к моделям:
Компьютерные аксессуары - MF29A(TNM) (1.74 mb)
Компьютерные аксессуары - MF29A( Vodacom) (1.74 mb)