Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
21 Espanol .............................................................. 42 © 2005 Dynex. DYNEX and the DYNEX logo are trademarks of Best Buy Enterprise Services, Inc. Other brands and product names are trademarks or registered trademarks of their respective holders. Specifications and features are subject to change without notice or obligation. Components The notebook kit is comprised of the following products: • USB 2.0 4-port hub (model: KITHUB) • Mini RF optical mouse (model: KITWOM) • Notebook surge protector (model: KITNBS) • Retractable RJ45 cable (model: KITRJ45) Using the USB 2.0 4-port hub Introduction The Dynex USB 2.0 4-port hub allows you to add multiple high-performance USB 2. 0 and USB 1.1 peripheral devices to your computer. SAFETY INSTRUCTIONS • Always read the safety instructions carefully. • Keep the user guide for reference. • Keep your hub away from water and humidity. • Place the hub on a flat surface when setting it up. • Contact a service technician if any of the following occurs: • The hub has been exposed to moisture. • The hub has been dropped or damaged. • The hub shows obvious sign of breakage. • The hub is not working as documented in this user guide. Using the USB 2.0 4-port hub 3 DX-NBKIT20-combo.fm Page 3 Friday, May 6, 2005 4:46 PM Features • Compliant with Universal Serial Bus Specification Revision 2.0 (data rate 1.5/12/480 Mbps) • Connects up to 127 USB devices (with multiple USB hubs) • Bus power and self-power modes • Plug-and-play • 1 upstream and 4 downstream USB ports included • Over-current detection and protection • 1 red LED power indicator System requirements • Desktop or notebook computer with USB port • One of the following operating systems (no driver needed): • Windows® 98/SE or newer •Mac™ OS X Installing the USB hub To install the hub: 1 Optional: Connect the power adapter (not included) to the power jack on the hub. For more information, see “Power adapter” on page 5. 2 Plug the cable into the type A connector on the computer. 3 Optional: Plug the power adapter into an AC power outlet. After you connect this hub to a computer, the computer detects the hub and installs the required drivers. 4 Using the USB 2.0 4-port hub DX-NBKIT20-combo.fm Page 4 Friday, May 6, 2005 4:46 PM VERIFYING INSTALLATION IN WINDOWS After installation is finished, go to the Device Manager to verify the completed installation. Note: Windows Me cannot identify the USB hub’s brand and the Device Manager shows a green question mark next to the hub’s icon. This does not affect how the hub functions. VERIFYING INSTALLATION IN MACINTOSH OS X After installation is finished, go to Apple System Profiler\Devices and Volumes\ USB to verify the completed installation. DX-NBKIT20-combo.fm Page 5 Friday, May 6, 2005 4:46 PM Using the USB 2.0 4-port hub 5 Troubleshooting If the hub experiences an excessive current, over-current protection disconnects power from the port. The USB Hub Current Limit Exceeded dialog box opens. USB Hub To reset the hub: •Click Reset. Or, unplug the USB cable, then plug it back in. Specifications Ports ......................................................................... 1 upstream and 4 downstream Compliance ......................................................................... FCC; CE emissions Power.......................................... Bus power: 5V 500mA; Self power: 5V 2.5A Storage temperature.....................................................-14-185°F (-10-85°C) Working temperature ........................................................32-104°F (0-40°C) POWER ADAPTER Your USB hub has a power jack for connecting to an AC adapter. If you want to purchase an AC adapter it should have the following specifications: Input: 100-240v 50 Hz-60 Hz; Output: 5V 2.5A DX-NBKIT20-combo.fm Page 6 Friday, May 6, 2005 4:46 PM 6 Using the mini RF optical mouse Using the mini RF optical mouse Introduction This mini radio frequency (RF) optical mouse uses digital radio technology to connect with your computer. Setting up your mouse INSTALLING THE BATTERIES To install the batteries: 1 Press the tab on the bottom of the mouse, then remove the cover. 2 Insert the batteries as shown on the diagram inside the battery compartment. 3 Replace the cover. INSTALLING THE RECEIVER To install the receiver: • Plug the receiver into your computer’s USB port. ESTABLISHING A CONNECTION To set up a connection between the mouse and receiver: 1 Push the small on/off switch on the mouse to the On position. The optical mouse sensor turns red. DX-NBKIT20-combo.fm Page 7 Friday, May 6, 2005 4:46 PM Using the mini RF optical mouse 7 2 Press the ID Switch button on the bottom of the mouse. ID Switch button 3 Press the ID Switch button on the receiver. ID Switch button If you successfully establish a connection between the mouse and the receiver, the indicator on the receiver flashes several times. If the connection is not established successfully, repeat the above steps. DX-NBKIT20-combo.fm Pa...