Войти:
Оценок - 3, средний балл: 4 ( )

Инструкция по эксплуатации Tripp Lite, модель 96500

Производитель: Tripp Lite
Размер: 43.96 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


2. At the Found New Hardware Wizard, insert the driver diskette, select Install the software automatically (Recommended), then click Next. 3. Click Finish, remove the driver diskette and restart Windows to complete the installation. To Verify Windows 2000/XP/2003 Installation To Verify Windows 2000/XP/2003 Installation . Right click My Computer and click Manage. 2. Select Device Manager. 3. Double click SCSI and RAID Controllers, then double click Silicon Image SiI 0680 ATA/133 Controller to display driver properties. 4. A message This device is working properly is displayed in the dialog box, the driver has been correctly installed. Bios Configuration The UltraATA 133 PCI BIOS will appear everytime your system starts up. If the bios doesn't show, please try your controller in another PCI slot. During this (Post) process, the bios will show up and indicate the devices attached to it. Technical Support and Warranty QUESTIONS? SIIG’s Online Support has answers! Simply visit our website at and click on Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and one of our technical support analysts will promptly respond. A lifetime manufacturer warranty supplied with this product is offered by SIIG, Inc. Please see SIIG website for more warranty details. If you should happen to encounter any problems with this product, please follow the procedures below. If it is within the store's return policy period, please return the product to the store where you purchased from. If your purchase has passed the store's return policy period, please follow these steps to have the product repaired or replaced. Step 1: Submit your RMA request. Go to click Support, then RMA to submit a request to SIIG RMA. If the product is determined to be defective, an RMA number will be issued. SIIG RMA department can also be reached at (510)413-5333. Step 2: After obtaining an RMA number, ship the product. • Properly pack the product for shipping. All software, cable(s) and any other accessories that came with the original package must be included. • Clearly write your RMA number on the top of the returned package. SIIG will refuse to accept any shipping package, and will not be responsible for a product returned without an RMA number posted on the outside of the shipping carton. • You are responsible for the cost of shipping the product to SIIG at the following address: SIIG, Inc. 6078 Stewart Avenue Fremont, CA 94538 RMA #: • SIIG will ship the repaired or replaced product via Ground in the U.S and International Economy outside of the U.S at no cost to the customer. About SIIG, Inc. About SIIG, Inc. SIIG products offer comprehensive user manuals, many user-friendly features, and are backed by an extensive manufacturer warranty. High-quality control standards are evident by the overall ease of installation and compatibility of o...

Эта инструкция также подходит к моделям:
Компьютерные аксессуары - 93900 (43.96 kb)
Компьютерные аксессуары - 93900 (43.96 kb)
Компьютерные аксессуары - 95900 (43.96 kb)
Компьютерные аксессуары - 96900 (43.96 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории