Оценок - 5, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
Suite 600 Santa Clara, CA 95054 BLADE OS 5.1 BBI Guide Copyright © 2009 Blade Network Technologies, Inc., 2350 Mission College Blvd., Suite 600, Santa Clara, California, 95054, USA. All rights reserved. Part Number: BMD00139. This document is protected by copyright and distributed under licenses restricting its use, copying, distribution, and decompilation. No part of this document may be reproduced in any form by any means without prior written authorization of Blade Network Technologies, Inc. Documentation is provided “as is” without warranty of any kind, either express or implied, including any kind of implied or express warranty of non-infringement or the implied warranties of merchantability or fitness for a particular purpose. U.S. Government End Users: This document is provided with a “commercial item” as defined by FAR 2.101 (Oct. 1995) and contains “commercial technical data” and “commercial software documentation” as those terms are used in FAR 12.211-12.212 (Oct. 1995). Government End Users are authorized to use this documentation only in accordance with those rights and restrictions set forth herein, consistent with FAR 12.211- 12.212 (Oct. 1995), DFARS 227.7202 (JUN 1995) and DFARS 252.227-7015 (Nov. 1995). Blade Network Technologies, Inc. reserves the right to change any products described herein at any time, and without notice. Blade Network Technologies, Inc. assumes no responsibility or liability arising from the use of products described herein, except as expressly agreed to in writing by Blade Network Technologies, Inc. The use and purchase of this product does not convey a license under any patent rights, trademark rights, or any other intellectual property rights of Blade Network Technologies, Inc. Originated in the USA. RackSwitch is a trademark of Blade Networks, Inc. in the United States and certain other countries. Cisco® and EtherChannel® are registered trademarks of Cisco Systems, Inc. in the United States and certain other countries. Any other trademarks appearing in this manual are owned by their respective companies. BMD00139, November 2009 Contents Preface .. 5 Who Should Use This Book • 5 Related Documentation • 5 Typographic Conventions • 6 How to Get Help • 7 Chapter 1: Getting Started .. 9 Features • 9 Requirements • 9 Switch Set Up • 10 IP Interfaces • 10 Enabling/Disabling BBI Access • 10 Web Browser Set Up • 10 Starting the BBI • 11 Chapter 2: Browser-Based Interface Basics .. 15 Toolbar • 16 Context Tabs • 16 Commands • 16 Navigation Window • 17 Forms Window • 18 Message Window • 18 Chapter 3: Configuring the Switch .. 19 Configuration Steps • 19 Using the BBI to Load Switch Software • 21 Chapter 4: Viewing Statistics • 25 Steps for Displaying Statistics • 25 BMD00139, November 2009 BLADE OS 5.1 BBI Guide Chapter 5: The Dashboard • 27 Steps for Displaying Dashboards • 27 4 • Contents BMD00139, November 2009 Preface The Blade OS Browser-Based Interface (BBI) software is included with the RackSwitch G8000 (G8000). The BBI software lets you use your Web browser to access switch information and statistics, and to perform switch configuration via the Internet. This BBI Quick Guide provides an overview of how to access and use the Blade OS Browser-Based Interface. Who Should Use This Book This BBI Quick Guide is intended for network installers and system administrators engaged in configuring and maintaining a network. It assumes that you are familiar with your G8000, your Web browser, Ethernet concepts, IP addressing, the IEEE 802.1d Spanning Tree Protocol, and SNMP configuration parameters. Related Documentation For documentation on installing the switch physically, see the Installation Guide for your G8000. For details about the switch information, statistics, and configuration parameters available using the Blade OS BBI, see the Blade OS Command Reference and Application Guide. BMD00139, November 2009 BLADE OS 5.1 BBI Guide Typographic Conventions The following table describes the typographic styles used in this book. Table 1 Typographic Conventions Typeface or Symbol Meaning Example AaBbCc123 This type is used for names of commands, files, and directories used within the text. View the readme.txt file. It also depicts on-screen computer output and prompts. Main# AaBbCc123 This bold type appears in command examples. It shows text that must be typed Main# sys in exactly as shown.