Оценок - 5, средний балл: 4.2
(
)
)
|
Фрагмент инструкции
This option allows you to select how the application should handle both features at the same time. In most cases Error Diffusion will handle this situation quite well, but there are a few cases where selecting Ordered may be necessary Support KTX buffer region extension Defaults button Enabling this feature allows rapid updates of those portions of your screen that have changed. Note that most applications will not be affected by activating this feature This button allows you to reset the OpenGL Compatibility Settings to default values. Using TV Out View your PC’s display on a TV The RADEON™ 7000 64MB AGP version has TV Out capability. You can connect this card to a TV and monitor at the same time. Or you can connect it to your VCR and record your monitor’s display. TV display is ideal for playing games, giving presentations, watching movies, and browsing the Internet. The following tips will help you get the most out of your TV Out feature. IMPORTANT INFORMATION for European Customers Some PC monitors in Europe cannot be used simultaneously with TV display. When you enable TV display in Europe, the refresh rate for the monitor and TV is set to 50Hz. Some monitors may not support this refresh rate and could be damaged. • Please check the documentation supplied with your monitor to see if your monitor supports a refresh rate of 50Hz. If your monitor does not support 50 Hz (or if you are not sure), then turn off your monitor before turning on your PC when using your TV as a display. For information on disabling TV display, see How To Enable/Disable The TV Display on page 30. Some TVs in Europe may use a SCART connection. If you use SCART, please read Using SCART Connectors for European TVs on page 30 before attempting to connect your PC to your European TV. Connecting to a TV or a VCR To connect the RADEON™ 7000 64MB AGP to a TV or a VCR, use an S-Video cable. However, most TVs (and VCRs) have a Composite video input, in which case you can use an S-Video-to-Composite adapter. If your TV has cable input only, you can connect your card to your TV through your VCR or an RF modulator (available in most electronics stores). Connecting Your S-Video Out to a TV or VCR 1 Turn off your PC and your TV (or VCR). 2 Ensure your card was installed correctly as per the Getting Started Guide. 3 Determine if your TV (or VCR) has an S-Video or Composite video connection. 4 Looking at the back of your PC, locate your S- Video Out. Using an S-Video cable (or S-Videoto- Composite adapter), attach one end of the cable to your graphics card and the other to your TV (or VCR). Refer to the illustration for further help. 5 Turn on your PC and your TV (or VCR). S-Video Out S-Video In OR Composite In PC S-Video Cable TV or VCR NOTE: Newer TVs may have OR the Video Input on the front S-Video-to-Composite Adapter panel Starting Windows® with TV Display Enabled The TV screen may become scrambled during the initial Windows® logo display. This is only a temporary effect and your screen will be restored within a few seconds. During start up, your RADEON™ 7000 64MB AGP will go through a sequence of mode settings, during which your TV display will remain blank. This process takes only a few seconds and helps program the TV display. Using SCART Connectors for European TVs (Right = red) Audio In (Left = white) Connect to PC Connect to Audio Cable Audio Out TV or VCR Video Adapter Cable Connect to PC SCART Composite Video-In (yellow) S-Video Out CONNECTOR The SCART connector supports only the Composite video format, which means you will have to use an S-Video-to-Composite Video Adapter Cable. The above illustration shows how to connect your PC to a European TV using the SCART. If your European TV does support S-Video (S-VHS) input, you should use an S-Video cable (available in most consumer electronic stores) rather than the SCART connector. How To Enable/Disable The TV Display 1 Access the Windows® Control Panel. Double- click Display. 2 Click on the Settings tab and then the Advanced... button. 3 Click on the ATI Displays tab. Click on the TV button. 4 Click the enable/disable button. 5 Click OK or Apply to save the changes. Using and Adjusting TV Out For information about how to use TV display, right click the ATI taskbar icon, point to Help, then point to ATI Television Display. Using a Monitor vs. Using the TV Display Using your TV for your PC’s display is ideal for playing games, giving presentations, watching movies, and browsing the Internet. However, the display on your monitor may change or looked squashed. This occurs because the display adjusts to fit the dimensions of your TV. To correct the monitor’s display, use the controls available on the Monitor Adjustments Tab on page 8. Some single frequency monitors may not work with TV display enabled. If you experience problems when TV display is enabled, disable TV display to restore your monitor’s display. Adjusting Monitor Display The size of the display on your monitor may be smaller an...
Эта инструкция также подходит к моделям:Компьютерные аксессуары - RADEON 7200 (459.83 kb)