Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
Tighten all bolts. 5. Mount to floor, using suitable fasteners (see note below). 6. Install equipment using provided screws. NOTE: -Due to variances in floors, shims may be needed under base angles. -To square legs, measure diagonally between top and bottom bolts. The distance between A and B should be the same as C and D (see Figure 2). BELKIN TOOLS NEEDED: 1/2" wrench or socket Measuring tape #2 Phillips screwdriver Parts List ITEM QTY DESCRIPTION 1 2 Steel Rack Leg 2 2 Steel Rack Base З 2 Steel Rack Top Angle 4 12 Hex Cap Screw 5/1 б-18 x 1 5 12 Flat Washer 5/1б" 0.б88 O.D. б З0 Pan Head Phillips 10-З2 x 0.5...