Оценок - 5, средний балл: 3.6
(
)
)
|
Фрагмент инструкции
Boeing Avenue 333 1119 PH Schiphol-Rijk, The Netherlands +31 (0) 20 654 7300 +31 (0) 20 654 7349 fax Belkin GmbH Hanebergstrasse 2 80637 Munich, Germany +49 (0) 89 143405 0 +49 (0) 89 143405 100 fax Belkin SAS 130 rue de Silly 92100 Boulogne Billancourt, France +33 (0) 1 41 03 14 40 +33 (0) 1 41 31 01 72 fax © 2005 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. RK1004ek INSTRUCTIONS RK1004ek Product Inventory IEC power supply cable Enclosure (1) Leveling Glides (4) M6 Screw (50) M6 Cage Nut (50) Rack Mount Power Strip (1) Key (8) Leveling Glide Instructions 1. Your Belkin RK1004ek comes with 4 leveling glides. Thread these into the 1/2” (13mm) x 13 threaded holes located on the outside of each corner of the Enclosure. 2. Once installed, Enclosure can be leveled using a 3/4” (20mm) open-end wrench. NOTE: A 11/16” (17mm) ( through hole (4) is supplied for those applications where the Enclosure needs to be anchored to the floor. Side Panel Removal Through Holes (4) 11/16” (17mm) dia. Threaded Holes 1/2” (13mm) - 13 thds. LIFT TILT UNLOCK RK1004ek Instructions P35772ec EN DE FR Belkin Tech Support Europe: 00 800 223 55 460 For other languages: Belkin Ltd. Express Business Park Shipton Way, Rushden NN10 6GL, United Kingdom +44 (0) 1933 35 2000 +44 (0) 1933 31 2000 fax Belkin B.V. Boeing Avenue 333 1119 PH Schiphol-Rijk, The Netherlands +31 (0) 20 654 7300 +31 (0) 20 654 7349 fax Belkin GmbH Hanebergstrasse 2 80637 Munich, Germany +49 (0) 89 143405 0 +49 (0) 89 143405 100 fax Belkin SAS 130 rue de Silly 92100 Boulogne Billancourt, France +33 (0) 1 41 03 14 40 +33 (0) 1 41 31 01 72 fax © 2005 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Operating Door Swing Handle Instructions 1. The doors on your RK1004ek Enclosure are reversible. Open the door and lift it off of its hinges. 2. Remove the male and female hinge parts from the Enclosure and the door. 3. Reverse them and re-install to allow left-hand door swing. 4. Remove swing handle and reverse. Mounting Rails Rails can be adjusted front to rear by loosening the 1/4” (6mm) - 20 hex nut and sliding to desired location then re-tightening the hex nut using a 7/16” (11mm) wrench or socket. REVERSIBLE HINGE (FEMALE) FLAT HEAD PHILLIPS SCREW #10-32 X 3/8” (10mm) DOOR DETAIL HINGE MOUNTING FRAME DETAIL PIVOT WASHER REVERSIBLE HINGE (MALE) FLAT HEAD PHILLIPS SCREW #10-32 X 3/8” (10mm) Belkin Ltd. Express Business Park Shipton Way, Rushden NN10 6GL, Royaume-Uni +44 (0) 1933 35 2000 +44 (0) 1933 31 2000 Fax Belkin B.V. Boeing Avenue 333 1119 PH Schiphol-Rijk, Pays-Bas +31 (0) 20 654 7300 +31 (0) 20 654 7349 Fax Belkin GmbH Hanebergstrasse 2 80637 Munich, Allemagne +49 (0) 89 143405 0 +49 (0) 89 143405 100 Fax Belkin SAS 130 rue de Silly 92100 Boulogne Billancourt, France +33 (0) 1 41 03 14 40 +33 (0) 1 41 31 01 72 Fax © 2005 Belkin Corporation. To...
Эта инструкция также подходит к моделям:Компьютерные аксессуары - RK1004ek (1.35 mb)