Оценок - 4, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
Use handles or knobs. 3 To protect against fire, electric shock and personal injury do not immerse cord, plugs or appliance in water or other liquid. 4 Close supervision is necessary when any appliance is used by or near children. 5 Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance. 6 Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any way. Return appliance to the nearest authorized service centre for examination, repair or adjustment. 7 The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock or personal injury. 8 Do not use outdoors. 9 Do not let cord hang over edge of table or counter, or touch hot surfaces. 10 Do not place on or near a hot gas or electric burner, or in a heated oven. 11 Always turn appliance “OFF”, then plug cord into the wall outlet. To disconnect, turn switch to “OFF”, then remove plug from wall outlet. 12 Do not use appliance for other then intended household use. 13 Use extreme caution when using hot steam. SAVE THESE INSTRUCTIONS 2 CAUTION This appliance is for household use. Any servicing, other than cleaning and user maintenance, should be performed by an authorized service centre. Do not immerse base in water. To reduce the risk of fire or electric shock, do not disassemble the base. There are no user serviceable parts inside. Repair should be done by authorized service personnel only. 1 Check voltage to be sure that the voltage indicated on the nameplate agrees with your voltage. 2 Never use warm or hot water to fill the water tank. Use cold water only. 3 Keep your hands and the cord away from hot parts of the appliance during operation. 4 Never clean with scouring powders or hard implements. Simply use a soft cloth dampened with water. 5 To avoid your coffee maker scaling up, use purified or bottled water. INSTRUCTIONS FOR THE POWER SUPPLY CORD A A short power-supply cord is provided to reduce risks of getting tangled up or tripping over a longer cord. B Longer extension cords are available and may be used if care is exercised in their use. C If a long extension cord is used: 1 the marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance. 2 if the appliance is of the grounded type, the extension cord should be a grounding type 3 the cable does not hang from the table to avoid the risk of getting caught up in it. NA To obtain warranty services call 1-877-356-0766 or e-mail to: service@aristonamerica.com 3 4 NA Installation ! Keep this booklet for consultation at any time. In the event of sale, transfer of the machine or of the owner ensure that the booklet is kept with the machine so that the new owner is informed of the operating instructions and warnings. ! Read all instructions carefully. They contain important information regarding installation, operation and safety. Positioning ! Packaging is not a toy for children and should be disposed of in accordance with regulations for separated waste collection (see Precautions and recommendations). ! Installation must be carried out in compliance with these instructions by professionally qualified personnel. Incorrect installation may cause damage to persons, animals and/or objects. Built-in installation To ensure the correct functioning of the appliance, the cabinet must have the right characteristics: • the panels next to the coffee machine must be in heat-resistant material; • veneered wood cabinets should be joined using glues resistant to 100°C/212°F and must be steamresistant; • for all installations of built-in coffee machines cabinets should have the following dimensions: ! Once the appliance has been encased, there must be no contact possible with electrical parts. Declared consumption values shown on the rating plate are measured on the basis of this type of installation. Ventilation To ensure good ventilation, remove the rear panel of the cabinet. It is recommended to install the coffee machine so that it is resting on a continuous surface with an opening of at least 1.” x 21.” (45 x 540 mm) in the base. Centring and fixing To centre the coffee machine, position the shims beneath the holes in the outer structure of the machine. ! All shims must be attached so that they ensure perfect stability of the machine. To attach the shims to the cabinet proceed as follows: • remove the drip tray from the machine; • fasten the 2 wood screws in the 2 holes located to the rear of the base. • remove the lower plastic protection; NA 5 Water connection ! Before connecting the supply pipe to the water mains, let the water flow until it is clear. ! The distance between the sources for the electric and the water connections have to comply with the regulations in force at the moment of installation. 1. Remove the protective cap from the water outlet. ! All protective ...