Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Message Tones Convenient message tones instantly communicate coffee maker status. The coffee maker will beep three times when a brewing cycle is complete. If the coffee maker is turned on or the brew timer is activated without sufficient water in the reservoir, the coffee maker will beep once; it will also beep once when the reservoir is near full during filling. Message tone volume can be set high or low, or turned off for silent operation. Automatic Shutoff Coffee maker shuts off two hours after the last carafe is brewed. Stainless Steel Heat Pump The 1350 watt heat pump brews quickly, providing exceptionally smooth and flavorful coffee. The commercial stainless steel construction minimizes calcium build-up for maximum durability. Advanced Ion-Exchange Water Filter Replaceable filter reduces chlorine and other contaminants which impair coffee flavor. Filter also softens the water, which extends the time between descalings. Quiet Finish™ Brewing The advanced brew system design reduces noisy hissing and gurgling throughout the brewing cycle. Optional Gold Tone Permanent Filter The gold tone filter eliminates the need for paper coffee filters. The fine, gold tone metal screen delivers exceptional brewing performance. 12 PREPARING THE COFFEE MAKER FOR USE Pre-Use Cleaning Wash the filter basket, basket insert, carafes, and carafe lids in hot, soapy water, then rinse with clean water and dry. Do not use abrasive cleansers or scouring pads. These parts may also be washed in the top rack of the dishwasher. Installing the Water Filter Since most tap water is chlorinated and contains some level of calcium, the use of a PRO LINE™ Series Water Filter is recommended. The advanced ion-exchange water filter reduces chlorine and other contaminants which impair coffee flavor. The filter also softens the water, which extends the time between descalings. The PRO LINE™ Series Water Filter will filter approximately 25 gallons of water (60 full carafes). When a filter has reached the end of its life, the water filter icon will appear on the brew timer display. Use of the water filter is optional: the coffee maker will operate normally without it. If a water filter is not used, the filter icon will still appear on the brew timer display as a reminder to descale the coffee maker. To reset the icon after it appears, see page 23. The water filter is for use only with municipally treated tap water or well water that is regularly tested for contaminants. To Install the Filter: 1. Remove the cartridge from its packaging. 2. Place the filter cartridge in a separate container filled with fresh, cool water; the cartridge should remain submerged in the water for 10 minutes. 3. Remove the water filter access cover from the coffee maker. FEATURES AND OPERATION Continued… 13 PREPARING THE COFFEE MAKER FOR USE 4. Place the filter cartridge in the circular well at the bottom of the water reservoir. Push the cartridge slightly to make sure it fits snugly. 5. Replace the water filter access cover and run the coffee maker through a complete brewing cycle without coffee. Use a full carafe of clean, cool water. WARNING Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. Setting the Time-Of-Day Clock When the coffee maker is first plugged in or when power is restored after an interruption, the brew timer display automatically enters the clock-setting mode. The hour digits on the display will flash until a time is set. 14 To Enter Clock-Setting Mode If the digits on the brew timer display are not flashing, enter the clock-setting mode by turning the Program-Clock Switch clockwise to the “Clock” position, then releasing. The hour digits will begin to flash. To Set The Clock 1. Press the “–” Timer Adjustment Button to decrease the hour or the “+” Timer Adjustment Button to increase the hour. If a Timer Adjustment Button is pressed and held, the hour digits will scroll. The AM and PM icons will change when the hour digits roll past “12”. Make certain the hour set is correct with regard to AM or PM. Timer Adjustment Buttons 2. Once the hour is set, turn the Program-Clock Switch clockwise to the “Clock” position, then release. The minute digits will begin to flash. 3. Press the “–” or “+” Timer Adjustment Buttons to adjust the minutes. If a Timer Adjustment Button is pressed and held, the minute digits will scroll. 4. Once the minutes are set, turn the Program-Clock Switch clockwise to the “Clock” position, then release. The minute digits will stop flashing and the brew timer display will exit the clock-setting mode. FEATURES AND OPERATION 15 BREWING COFFEE Before brewing coffee for the first time, run the coffee maker through a complete brewing cycle without coffee. Use a full carafe of clean, cool water. This rinses the water reservoir, heat pump, and showerhead. This first brew ...
Эта инструкция также подходит к моделям:Кофеварки - KPCM100 (422.38 kb)
Кофеварки - KPCM100 (422.38 kb)
Кофеварки - KPCM100 (422.38 kb)
Кофеварки - KPCM100 (422.38 kb)