Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
After use, allow it to cool before touching it. The appliance must be switched on and the water tank must be filled. 1 Turn the function selector to position 2. 2 Select "Hot water" using the rotary selector. 3 Place a cup or a glass under the coffee dispenser. 4 Touch the C symbol. 5 Set the quantity using the rotary selector. 6 Touch the C symbol. 7 Set the temperature using the rotary selector. 8 Confirm with ™ . 9 Press I to start. The water is heated and then flows into the cup or glass. Notes . While the beverage is dispensed, the & symbol is displayed. Touch this symbol to stop the beverage being prepared. . Using the ‡ symbol, you can save the current beverage: touch the ‡ symbol, turn the function selector to a free memory location, save the entry (see section Individual beverages). Setting the grinding level a Risk of injury! Do not reach into the grinding unit. Using the rotary selector for the grinding level, you can set your preferred fineness for the ground coffee. Caution! The appliance could be damaged. Only adjust the grinding level when the grinding unit is running. With the grinding unit running, set the rotary selector between a fine grinding level and a coarser grinding level. Notes . The new setting only becomes noticeable after the second cup of coffee. . Set a finer grinding level with dark- roasted beans and a coarser grinding level with lighter beans. Individual beverages You can define and save instructions for up to eight individual beverages. 1 Turn the function selector to one of the 8 memor y locations. 2 Touch the % symbol. 3 Use the C symbol to select the desired beverage, size, strength, temperature and coffee-milk ratio and use the rotary selector to save the settings. 4 Enter the name of the beverage in "ABC". Rotary selec- Selects letters tor A new word always begins with a capital letter. 4 Press briefly: moves the cursor right Press and hold: shifts to umlauts and special characters Press twice: adds a line break 5 Press briefly: moves the cursor right Press and hold: shifts to normal characters Press twice: adds a line break l Deletes letters 5 Save with ™ or cancel with ' and exit the menu. 6 Press I to start. Depending on the beverage selected, the beans will be ground first, then the milk prepared and finally the coffee brewed. Notes . While the beverage is dispensed, the & symbol is displayed. Touch this symbol to stop the beverage being prepared. . For entering a name, Latin characters, certain special characters and numbers are available. Child lock The appliance has a child lock to prevent children operating it accidentally. Note: You must set the child lock to "available" in the basic settings (refer to the Basic settings section) . Activating the child lock Prerequisite: The function selector is set to 0. Touch and hold the 0 symbol for at least 6 seconds. The child lock is activated. The 0 symbol is shown at the top of the display. Deactivating the child lock Touch and hold the 1 symbol for at least 6 seconds. The child lock is deactivated. You can set the appliance as normal. Basic setti ngs Yo u r ap pl ianc e c an b e i ndi vid ually a djus te d i n th e ba sic s ettin gs. 1 Turn the f unc tion sele ctor to S. 2 Selec t "B asi c se ttin gs" u sing th e ro t ar y sele ctor. 3 To u c h t h e ™ sy m b ol. 4 Turn the ro t a r y s e lec tor to sel ect the req uire d basic se tting . 5 To uc h the % sy m b ol. 6 S et the b a s ic s ettin g us in g th e r o ta r y s e le cto r. 7 Save wi t h ™ or c a n c e l wi t h ' a nd exit the cur ren t b a sic setti ng. 8 Tur n t he f un ctio n se lector to 0 to exit the b asic s et ting s me nu. T he ch ang es ar e save d. Basic setting Permitted settings Explanation Brightness Level 1, 2, 3, 4, 5* , 6, 7, 8 Sets the display brightness Hibernation mode Logo on* / off GAGGENAU logo display on or off in hibernation mode. Display screen Reduced* / Standard If set to Reduced, after a brief period only the most important information is shown. Touch field colour Grey* / White Selects the colour of the symbols on the touch fields Touch field tone Tone 1* / Tone 2 / Off Selects an audible signal for when a touch field is touched Touch field tone voume l- Level 1, 2, 3, 4, 5* , 6, 7, 8 Sets the volume of the touch field tone Light setting Lighting options 1* - 7 U Light off U Light on ~ Light only on when a beverage is being dispensed Capacity + / - 5 up to 50 ml Adjust the capacity to individual cup sizes. First select the beverage and then set the capacity. Beverage types cltext display ear on* / off Beverage name display on or off. Off: Only the symbol will be displayed. Automatic shut-off 5 minutes to 12 hours Set the time after which the appliance automatically rinses and switches off. Water filter Water hardness * Factory setting Available* /not available 1- 4* Available: Operating the appliance with a water filter. Not available: Operating the appliance without a water filter. Briefly immerse the enclosed test strips in fr...
Эта инструкция также подходит к моделям:Кофеварки - CM450130/08 (963.48 kb)
Кофеварки - CM450110C/08 (963.48 kb)
Кофеварки - CM450130C/08 (963.48 kb)