Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Machine Location Place the coffee machine in a safe place, where there will be no danger of overturning or injur y. Hot water or overheated steam may spill out of the machine: Danger of scalding! Do not keep the machine at a temperature below 0°C. Frost may damage the machine. Do not use the coffee machine outdoors. In order to prevent its housing from melting or being damaged, do not place the machine on very hot sur faces and close to open flames. Cleaning Before cleaning the machine, turn it off by pressing the ON/OFF button, then pull out the plug from the socket. Wait for the machine to cool down. Never immerse the machine in water! It is stric tly forbidden to tamper with the internal parts of the machine. Water lef t in the tank for several days should not be used for food purposes. Wash the tank and fill it with fresh drinking water. Suitable Location for Operation and Maintenance To ensure a correct and efficient per formance of the coffee machine, we recommend following the instructions below: • Choose a level sur face. • Choose a location that is suffi ciently well-lit, clean and near an easily reachable socket. • Allow for a minimum distance from the sides of the machine as shown in (Fig.A). Storing the Machine If the machine is to remain inactive for a long time, turn it off and unplug it. Store it in a dry place, out of the reach of children. Keep it protec ted from dust and dir t. Repairs / Maintenance In case of failure, problems or a suspec ted fault resulting from the falling of the machine, immediately remove the plug from the socket. Never attempt to operate a faulty machine. Servicing and repairs may only be carried out by Authorised Service Centres. All liability for damages resulting from work not carried out by professionals is declined. Fire Safety Precautions In case of fire, use carbon dioxide (CO2) ex tinguishers. Do not use water or dry powder extinguishers. Key to Machine Components (Page 2) 1 Control panel 2 Water tank lid 3 Hot water/steam knob 4 Seat for accessories 5 Water tank 6 Cup holder rest 7 Water recovery tray + grill 8 Brew unit 9 Steam wand (Pannarello) 10 Power cord 11 ON/OFF button 12 Pressurized filter holder 13 Ground coffee measuring scoop 14 Ground coff ee filter (single piece for 1 or 2 coffee(s)) 15 Pod filter adapter 16 Coffee pod filter 17 Selection knob 18 "Machine on" light 19 "Steam ready" light 20 Coffee/Water light - "Machine ready" • 16 • INSTALLATION For your own and other people safety, follow the "Safety Regulations" indicated in Section 3 carefully. 4.1 Packaging The original packaging has been designed to protect the machine during shipping. We recommend keeping the packaging material for possible future transport. 4.2 Installation Instructions Before installing the machine, read the following safet y instruc tions carefully: • Place the machine in a safe place; • Make sure children cannot play with the machine; • Do not place the machine on hot surfaces or near open Fill the tank only with fresh, non-sparkling, drinking water. Hot water or any other liquid may damage the tank. Do not operate the machine if water is not present: Make sure there is enough water in the tank. • (Fig.2) - Insert the water tank making sure that it has been properly repositioned in its former seat and then reposition the lid (2). 4.5 Circuit Priming At the beginning, af ter dispensing steam or when the water tank is empty, the machine’s water circuit must be primed. • Press the ON/OFF button (11) and switch it to the "I" position. The light (18) will turn on to indicate that the machine is on. • (Fig.4) - Place a container under the steam wand English .fl ames The coffee machine is now ready to be connected to the (Pannarello). • Open the "hot water/steam" knob (3) by turning it counterelec trical net work. Note: It is recommended to wash the components before using them for the first time and/or af ter they have not been used for a certain period of time. 4.3 Machine Connection Elec tric power may be very dangerous! It is therefore necessar y to strictly follow the safety regulations. Do not use faulty power cords! Faulty cords and plugs must be replaced immediately in Authorised Ser vice Centres. The voltage of the appliance has been pre-set by the manufacturer. Check that the voltage matches the indication on the data plate placed at the bot tom of the appliance. • Check that the ON/OFF button (11) is set on “0” before connecting the machine to the elec trical net work. • Inser t the plug into a wall socket with suitable power voltage. 4.4 Water Tank • (Fig.1) - Remove the lid from the water tank (2) by lifting it. • (Fig.2) - Remove the water tank (5). • (Fig.3) - Rinse and fill it with fresh drinking water taking care not to over fill. clockwise. • (Fig.5) -Set the selection knob (17) to the " " position. • Wait until a steady jet of water flows out of the steam wand (Pannarello). • (Fig.5) - Set the selection knob (17) to the " " position. • Close the "hot wate...