Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Note:The amount of the milk varieties may vary due to variations in milk temperature, type of milk, how clean the milk container unit is, etc. 5 Press the button indicating the number of cups of SENSEO® coffee you want to brew. -Press the 1-cup button q for one cup. -Press the 2-cup button qq for two cups. The SENSEO® coffee machine starts brewing. , -The machine automatically supplies the correct amount of water and milk, depending on the coffee variety selected. -You can interrupt the brewing process at any time by pressing the on/off button 3. If you switch the machine back on after having interrupted the brewing process, the machine does not complete the interrupted brewing cycle. Do not remove the water reservoir during a brewing cycle, as this causes the machine to draw in air.When this happens, the next cup is only partly filled. Do not remove the milk container during a brewing cycle. Note:When the machine brews a coffee variety with milk, some milk always stays behind in the milk container to guarantee optimal frothing quality. 6 Remove the coffee pod or pods after use by lifting the pod holder out of the machine and emptying it. Be careful when you do this, as there may still be some water/coffee on the coffee pod or pods. 7 Each time you have used the milk container unit to brew a coffee variety with milk, the CLEAN indicator lights up to remind you to flush the milk container unit when you no longer intend to brew a coffee variety with milk right away. Flushing the milk container immediately after use is very important for reliable performance of the milk container unit and good frothing results. Follow the instructions in section ‘Flushing after every use with the CLEAN button’ in chapter ‘Cleaning the milk container unit’. 8 Switch off the machine after use. Note: If you do not switch off the machine, it switches off automatically after 30 minutes. Cleaning the milk container unit Cleaning the milk container unit For a reliable performance of the milk container unit and consistently good frothing results, it is ver y impor tant that you follow each of the 2 cleaning procedures below: 16 EnglisH 1 Flushing after every use (when you do not plan to froth milk again straightaway). After each use, the CLEAN indicator lights up to remind you to flush the milk container unit.To flush the milk container unit, fill the milk reser voir with water and press the CLEAN button. See section ‘Flushing after ever y use with the CLEAN button’ in this chapter. 2 Cleaning all parts of the milk container unit after the last use of the day.To do this, remove the milk container lid from the milk container. Open/remove the blue par ts (milk container lid cover and steam inlet) and the milk tube. Then clean all par ts of the milk container unit with hot water and some washing-up liquid or in the dishwasher. See section ‘Cleaning all par ts after the last use of the day’ in this chapter. If you are unable to obtain high-quality frothed milk, the milk container unit is probably dirty. Clean the milk container unit by following the instructions in section ‘Cleaning all parts after the last use of the day’ in this chapter. Note:The machine only continues to produce high-quality frothed milk if you follow these instructions closely. Flushing after every use with the ClEAn button 12 Ever y time you have used the machine to froth milk, the CLEAN indicator lights up to remind you to flush the milk container unit by filling the milk container unit with water and using the CLEAN button. Note:You have to do this if you do not plan to froth milk again straightaway. Philips advises you to flush the milk container unit within 30 minutes after youhave used it. 1 2 Move the milk container lever upwards and remove the milk container unit. Press the milk container lid release lever (1) and remove the milk container lid from the milk container (2). 3 4 Pour out any milk that is left in the milk container and rinse the milk container briefly under the tap. Fill the milk container with cold water up to the latte macchiato o/ 2-cup cappuccino ¶¶indication. Note: Do not fill the milk container with warm or hot water. If you do, the machine only produces steam and does not clean the milk container unit properly. 5 5 EnglisH 17 1212 To fasten the milk container lid onto the milk container, first push the front of the milk container lid onto the edge of the milk container (‘click’) (1) and then push the rear end onto the milk container (‘click’) (2). 6 Slide the milk container unit into the coffee machine (1) and push down the milk container lever (‘click’) (2). 7 Place an empty cup under the coffee spout. 8 Press the CLEAN button. The milk container unit is flushed. , Cleaning all parts after the last use of the day 12 1 2 Press the milk container lid release lever (1) and remove the milk container lid from the milk container (2). Pull at the blue parts: 18 EnglisH -Pull at the tab on top of the milk container lid cover to open the cover. 321...
Эта инструкция также подходит к моделям:Кофеварки - HD7850/61 (2.05 mb)
Кофеварки - HD7850/60 (2.05 mb)
Кофеварки - HD7850/89 (2.05 mb)
Кофеварки - HD7850/69 (2.05 mb)