Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Note: Use SENSEO® coffee pods from Douwe Egberts specially designed for your SENSEO® coffee machine for a full and round taste. Note: Make sure the coffee in the pod(s) is evenly distributed and press the pod(s) lightly into the pod holder. Note: Never put normal ground coffee or use torn pods in the SENSEO® machine, as this causes it to become blocked. -Place 1 SENSEO® coffee pod in the 1-cup pod holder q. -Place 2 SENSEO® coffee pods in the 2-cup pod holder qq. 2 Close the lid and lock the lever. It is not possible to brew coffee when the lid is not properly closed and the lid lever is not locked. In this case, the light ring around the on/off button flashes intermittently 3 Place one cup or two cups under the spout openings.You can adjust the height of the coffee spout by sliding it upwards or downwards. The cups you use should have a capacity of at least 150 ml. Do not use cups that are too large, as they cause the coffee to get cold more quickly. EnglisH 13 4 Press the button indicating the number of cups of SENSEO® coffee you want to brew. -Press the 1-cup button q for one cup. -Press the 2-cup button qq for two cups. the sEnsEO® coffee machine starts brewing. -The machine automatically supplies the optimal amount of water. -You can interrupt the brewing process at any time by pressing the on/off button 3. If you switch the machine back on after having interrupted the brewing process, the machine does not complete the interrupted brewing cycle. Do not remove the water reservoir during a brewing cycle, as this causes the machine to draw in air.When this happens, the next cup is only partly filled. Note: If no coffee comes out of the machine, you have not flushed the machine before first use. As a result, the boiler is not filled. Flush the machine as described in chapter ‘Before first use’ before you start brewing coffee. If only a small amount of coffee comes out of the machine, flush the machine as described in section ‘Flushing’ in chapter ‘Cleaning’ before you brew another cup of coffee. 5 Remove the coffee pod(s) after use by lifting the pod holder out ofthe machine and emptying it. Be careful when you do this, for there may still be some water/coffee on the coffee pod(s). Interrupting the brewing process 1 Press the on/off button 3 to interrupt the brewing process. Note: If you switch the machine back on after you have interrupted the brewing process, the machine does not complete the interrupted brewing cycle. Switching off 1 After use, press the on/off button 3 to switch off the machine. Note: If you do not use the machine, it switches off automatically after 30 minutes, for energy saving. 14 EnglisH Cleaning the machine Never immerse the SENSEO® coffee machine in water. Cleaning the coffee machine 1 2 3 Always unplug the machine before you clean it. Clean the outside of the machine with a moist cloth. Remove the coffee collector. 4 Take the coffee spout out of the machine by sliding it upwards. Note:You can only remove the coffee spout after you have removed the coffee collector. 5 Disassemble the coffee spout if you want to clean it more thoroughly. 6 Clean the coffee spout, the coffee collector and the drip tray in hot water, if necessary with some washing-up liquid, or in the dishwasher. 7 Hold the cup tray in your hand while you clean it with hot water. If necessary, use some washing-up liquid. The cup tray can also be cleaned in the dishwasher. To clean the cup tray, always remove it from the machine, as it might prove sharp when handled incorrectly. Always handle it carefully. EnglisH 15 8 Clean the pod holders in hot water, if necessary with some washing- up liquid, or in the dishwasher. Check if the sieve in the centre of the pod holder is clogged. If this is the case, unclog the sieve by rinsing the pod holder under a running tap. If necessar y, use a washing-up brush to clean the sieve. 9 Clean the water reservoir in hot water, if necessary with some washing-up liquid, or in the dishwasher. Note: If you use a washing-up brush, be careful not to damage the valve in the bottom of the water reservoir. Remove the water reservoir cover for easier cleaning. 10 Clean the water inlet on the machine with a moist cloth. Do not use an object with sharp edges to clean the water inlet. 11 Rinse the parts with fresh water and put them back into the machine. 12 Clean the water distribution disc with a moist cloth. Be careful when you do this; make sure that the rubber sealing ring does not get stuck under the edge of the water distribution disc. If it does, the coffee machine will star t leaking! Note: Be careful not to damage the metal tab on the water distribution disc. Flushing the coffee machine If you have not used the coffee machine for one day, you have to flush the machine with fresh water before you use the machine again. To flush the boiler, brew two cups of hot water in the following way: 1 Fill the water reservoir with cold water at least up to the MIN level and put it back into the mac...
Эта инструкция также подходит к моделям:Кофеварки - HD7827/51 (7.03 mb)
Кофеварки - HD7827/50 (7.03 mb)