Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
• Once you have enough hot water in your cup push the Hot Water Button again. The display shows CONFIRMED 4. COFFEE READY 26. PROGRAMMING / MAINTENANCE The Z5 provides programming, maintenance and look-up functions. With the display at COFFEE READY you can access these functions as follows: • Push and hold the Rotary Dial until you hear a beep and the display shows FILTER. The Z5 offers the following Functions (see adjacent chart) Turn the dial clockwise slowly to scroll through Functions. Please note: to get back to COFFEE READY, turn the Rotary Dial until the display shows EXIT, then push the Rotary Dial. Function Display Comment Chapter Clearyl Water Filter FILTER NO or Install and activate the 23A FILTER YES Clearyl Filter Water Hardness HARDNESS Change water hardness 24A (if FILTER is set to (when not using the YES, this function Clearyl Filter) is suppressed) 23. Function Display Comment Chapter Function Display Comment Chapter Maintenance MAINTENANCE Activate maintenance programs outside the automatic prompts 26.1 Renaming display message RENAME Rename the beverage buttons, the "on" and "off" messages 26.11 Temperature TEMPERATURE Choose for each of the six coffee buttons from three temperature settings 26.2 Language LANGUAGE Change the display to another language 26.12 Coffee Strength AROMA Choose for each of the six coffee buttons from five different strength settings 26.3 Display DISPLAY Choose cup size info. in OZ. to ML. Choose time display in 24HRS or AM/PM mode 26.13 Cappuccino CAPPUCCINO Change the pre-set values for milk time and coffee volume 26.4 Exit programming EXIT The only way to get back to COFFEE READY Milk Energy Saving Time Auto-On Auto-Off Information MILK ENERGY TIME UNIT ON OFF AFTER INFORMATION Change the pre-set value for the milk time Choose from three power saving modes Set actual time Choose an auto-on time Choose an auto-off time after last use Check performance and a variety of settings 26.5 26.6 26.7 26.8 26.9 26.10 26.1 MAINTENANCE PROGRAMS COFFEE READY • Push and hold the Rotary Dial until you hear a beep and the display shows FILTER. • Turn the dial until the display shows: MAINTENANCE • Push and turn the Rotary Dial to select from the following Maintenance Programs: RINSE UNIT CAPPUCCINO CLEANING CHANGE FILTER (this program will only show up if FILTER is set to YES) CLEAN UNIT CAPPUCCINO RINSING DECALCIFY UNIT. 24. To activate one of the above programs, push the Rotary Dial and follow the instructions on the display. Please note: If you do not select any of the Maintenance Programs, the display will return to COFFEE READY. 26.2 TEMPERATURE You can set the coffee temperature for the Cappuccino Button, the Special Coffee Button and the four coffee buttons on the right side to LOW, NORMAL or HIGH. The factory setting for these buttons is HIGH. The temperature difference between LOW and HIGH is approx. 7. F. Please note: the temperature also depends somewhat on the fineness setting of the grinder (chapter 7). The finer the grind the slower the water will pass through the coffee causing it to get somewhat hotter. Changing the temperature: COFFEE READY • Push and hold the Rotary Dial until you hear a beep and the display shows FILTER. • Turn the dial until the display shows: TEMPERATURE a. Push the Rotary Dial. SELECT PRODUCT. b. Push the beverage button for which you want to change the temperature, e.g. the 1-cup Espresso Button. The display shows 1 ESPRESSO HIGH. c. Turn the Rotary Dial and select NORMAL (example). d. Push the Rotary Dial to confirm. CONFIRMED 4 e. TEMPERATURE. To change another beverage button start with a. again. 26.3 COFFEE STRENGTH / AROMA You can set the coffee strength for the Cappuccino Button, the Special Coffee Button and the four coffee buttons on the right side to XMILD, MILD, NORMAL, STRONG, XSTRONG. For factory settings see chapter 5. In XMILD the 1-cup buttons grind for about 4 seconds, in XSTRONG for about 8 seconds. The 2-cup buttons grind between 7 and 10 seconds respectively. The minimum amount of coffee to be ground is approx. 5 grams, the maximum approx. 16 grams. Please note: the amount of ground coffee also depends on the fineness settings of the burr grinder. The coarser the setting the more coffee is ground through the burrs. COFFEE READY • Push and hold the Rotary Dial until you hear a beep and the display shows FILTER. • Turn the dial until the display shows: AROMA a. Push the Rotary Dial. SELECT PRODUCT. b. Push the beverage button for which you want to change the coffee strength, e.g. the 2-cup Coffee Button. The display shows 2 COFFEE NORMAL. c. Turn the Rotary Dial and select XSTRONG. d. Push the Rotary Dial to confirm. CONFIRMED 4 e. AROMA. To change another beverage button start with a. 26.4 CAPPUCCINO PROGRAMMING Chapter 25.2 explains how to change the pre-sets for milk and the coffee volume while the Z5 is brewing. In programming you can simply change the pre-sets by changing the values shown in the display without makin...