Оценок - 2, средний балл: 3 ( )

Производитель: Jura Capresso Размер: 514.79 kb Название файла: Язык инструкции:

13.6 Programming Filter Please read chapter 7.1 “Placing filter“. 13.7 Programming water hardness (only with setting Filter no) HARDNESS LEVEL 3 Press key P By pressing key + or - briefly you can programme the water hardness level. Then press key + P briefly to store the water hardness level in memory. By pressing the button, you can select the next phase, or press the N button in order to leave the programming. To determine the water hardness level please read chapter 6. “Adjusting for water hardness“. 13.8 Programming economy mode ECONOMY MODE OFF Press key P By briefly pressing key + or - you can programme the mode you would like. Then press key P briefly to store mode in memory By pressing the + button, you can select the next phase, or press the N button in order to leave the programming. You can programme your machine to “economy mode“. In the setting ECONOMY MODE ON the steam heating-system is switched off. The heating for the cup warming tray is switched off too. If you want to draw off steam you need to press the steam key , warning lamps flash and your machine heats up. After 10 minutes the steam heating-system switches off automatically. The warning lamps go out. By pressing the steam key anew, you return to stand-by-status for drawing off steam. ECONOMY MODE OFF means that the stand-by-status for steam is set to 20 minutes and the heating for the cup warming tray is on. After 10 minutes the warning lamp goes out. By pressing the steam key anew, the machine returns to stand-by-status for drawing off steam. 13.9 Programming timer clock A programming of the timer clock is necessary if an automatic switch on time is required. TIME —.— Press key P . By briefly pressing key + P + or - you can set the hours and then confirm by pressing key . By briefly pressing key or - you can set the minutes and then confirm by pressing key . P By pressing the + button, you can select the next phase, or press the N button in order to leave the programming. 13.10 Programming automatic switch on time A programming of the timer clock is necessary if an automatic switch on is needed. UNIT ON —.— Press key P . By briefly pressing key + P + or - you can set the hours and then confirm by pressing key . By briefly pressing key or - you can set the minutes and then confirm by pressing key . P By pressing the + button, you can select the next phase, or press the N button in order to leave the programming. To switch off the automatic timer proceed as follows: Press key Press key N P UNIT ON —:— 15 E 13.11 Programming automatic switch off time OFF AFTER 5.0 HOURS Press key P By briefly pressing key P + or - you can set the hours and then confirm by pressing key (0.5 to 9.0 hours). By pressing the + button, you can select the next phase, or press the N button in order to leave the programming. 13.12 Cup counter 200 SUPPLIED (TOTAL SUPPLIED) To obtain the information press the required key. The display will show you the number of times the function has been chosen. By pressing the + button, you can select the next phase, or press the N button in order to leave the programming. It is not possible to call up hot water and steam supplies. 13.13 Programming language selection Press key P By briefly pressing key + or - call up the language desired and then confirm by pressing key P . By pressing the N button, you can select the next phase, or press the + button in order to leave the programming. 13.14 Program key N By using key N you can set back the following settings (powder quantity, coffee temperature, water quantity, steam portion, tea portion) to their original standard settings. COFFEE READY Press key N until you can hear an acoustic signal. If a mistake occurs while programming one of the above settings, just press key N and the chosen setting moves back to its original standard setting. 14. Care and maintenance 14.1 Fill water FILL WATER If this message shows on the display no more coffee can be drawn off. Top up water. The water tank should be rinsed and filled with fresh water daily. Only use fresh, cold water. Never top up with milk, mineral water or any other liquids. You can top up water without removing tank. 14.2 Empty grounds container Coffee grounds are collected in the grounds container (23). EMPTY GROUNDS If this message shows on the display no more coffee can be drawn off. It is necessary to empty the grounds container. Remove drip tray carefully as there is water in it. Do not disconnect the machine from power socket while you empty grounds. 14.3 Empty drip tray EMPTY TRAY If this message shows on the display no more coffee can be drawn off. It is necessary to empty the drip tray. Remove drip tray carefully as there is water in it. 14.4 Fill beans FILL BEANS Fill beans as described in chapter 3.3. The message FILL BEANS will only disappear after drawing off a coffee. We recommend cleaning the bean container from time to time with a dry cloth before you refill beans. Switch off the ma...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: