Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
Traces of Coffee Grounds in New Machine? This is normal! Grinder was tested during assembly with beans. Despite cleaning, traces of ground coffee may be found. READYSELECTOR (enlarged view) a. Coffee b. Steam / Hot Water On/Off P Button 1-Cup 2-Cup Rinse Steam DIAL SELECTOR Dual Frother PLUS a b Impressa F7/F8 Control Panel Dual Coffee Dispenser Nozzels Frother sleeve (slides up and down) mild normal strong RED TEXT represents information in the display. A) First Time Ever Preparation Place machine on a flat, hard surface. 1. Fill water in tank and beans in bean container. 2. DO NOT install the Water Filter Cartridge now! 3. Push ON/OFF button. OPEN TAP. Place a cup underneath the frother and turn the SELECTOR to the water symbol. SYSTEM FILLING. Water pumps through the frother into the cup and stops automatically. CLOSE TAP. Turn the SELECTOR to the Cup Symbol. SYSTEM FILLING. HEATING. After two minutes PRESS RINSE. 4. Place a cup underneath the coffee spout and push the RINSE button. READY. Place a large cup underneath the coffee spout and press the 1-CUP button. The F7/F8 starts grinding and brews coffee. Discard the first two cups. READY. You can only brew coffee when the display shows READY. B) Daily Preparation • Fill fresh water in tank and check bean container. • Push ON/OFF button: HEATING. RINSE. • Place a cup under the coffee spouts and press the RINSE button. READY. C) Factory Settings / Programming Functions Filter: – Unit On: Not Set Hardness: Level 2 Off Aft Hrs: 2 HRS Aroma: ROBUST Cups Made: Temperature: HIGH Language: English Time: Not Set Display: OZ. and AM/PM D) Grinding and Brewing • Push the DIAL. Display shows the cup size, e.g. 4.0 OZ. • Turn the DIAL to change the cup size from 1.0 to 8.0 OZ. • Push the 1-CUP button once: MILD, twice NORMAL, three times STRONG. • When pushing the 2-CUP button, the machine will brew twice as much coffee as set with the 1-CUP button. HOTTER COFFEE? Pre-warm cup with hot water through frother. See chapter F "Using Hot Water". Empty cup and brew coffee. E) Changing the Grinder Fineness Important: You can only adjust the fineness during the actual grinding process. • Open the bean container lid and turn the dial while grinding: thicker bars: coarser grind; thinner bars: finer grind. • For darker, oily beans – grind somewhat coarser. For lighter beans – grind somewhat finer. F) Using Hot Water • Place a cup underneath the frother. Turn the SELECTOR to the water symbol, e.g. 5 OZ. • Turn the DIAL to select the desired amount of water from 1 to 16 oz.. WATER. CLOSE TAP. Turn the SELECTOR to the Coffee Symbol. You can always stop the hot water flow before the display shows CLOSE TAP. G) Using Steam (Frothing and Steaming) Important: frother parts must be tightly connected and clean. • Cappuccino: One shot espresso plus ~ 4 oz. of steamed and frothed milk. Metal frother sleeve DOWN • Latte: One shot espresso plus ~ 4 to 5 oz. of steamed milk. Metal frother sleeve UP: steaming only (no frothing) 1. Push the STEAM button. HEATING. After ~ 20 sec.: STEAM READY. 2. Immerse the frother into a pitcher with milk and turn the SELECTOR to the water symbol, e.g. 40 SEC. Turn the DIAL to select to desired steaming time (3 to 120 sec). STEAM. Steam pushes into the milk. 3. CLOSE TAP. Turn the SELECTOR to the Cup Symbol. You can always stop the steam output with the SELECTOR. 4. For additional steam repeat steps 1 through 3. 5. After steaming you can immediately brew coffee. Knocking Noise during Frothing: The pumps dispenses water droplets into the heating system. Please note: Skim and 1% milk will produce more froth than 2% and regular milk. HOTTER MILK? After frothing the milk, use the steaming position (Frother sleeve UP) to increase the milk temperature. H) Cleaning the Frother Within 10 min. after last use, place a cup under the frother. Turn the SELECTOR for 5 sec. to the Hot Water symbol. For thorough cleaning see page 15 of the Operating Instructions. J) Programming Push and hold the P button until the display shows FILTER -. Turn the DIAL to access the other functions: HARDNESS, AROMA, TEMP., TIME, UNIT ON, AUTO OFF, CUPS MADE, LANGUAGE, DISPLAY. Select the function, push the DIAL, turn DIAL to see or select option. Push DIAL to confirm. Push P button to get back to READY. For details see Operating Instructions. K) Installing and Ac...
Эта инструкция также подходит к моделям:Кофеварки - F8 (31.92 kb)