Войти:
Оценок - 2, средний балл: 4.5 ( )

Инструкция по эксплуатации Keurig, модель B70

Производитель: Keurig
Размер: 116.76 kb
Название файла: 3f29eaae-4ec7-4159-878c-8ab53636f139.pdf
Язык инструкции:enfr
Перейти к скачиванию



Фрагмент инструкции


Please follow these easy steps and you will discover what Deliciously Simple® truly means. Please note, if your Brewer has been exposed to temperatures below freezing, it is recommended you allow two hours for an unpacked Brewer to warm to room temperature before priming or brewing. 1. Unpacking the Platinum B70 Brewer a. Carefully remove the Brewer by placing the box on its side, pulling the Brewer out of the box and removing the protective materials. b. Place the Brewer upright on a flat surface. Remove adhesive tape from Brewer. c. Unwrap cord and plug Brewer into a grounded outlet. 2. Priming a. Place a 12 oz. mug on the Drip Tray Plate. b. Remove the Water Reservoir from the Brewer by first removing the Lid from the Water Reservoir, then lifting the Water Reservoir straight up and toward the front of the Brewer. Rinse and fill with bottled or filtered water. Replace the Water Reservoir back on the Brewer and replace the Lid. c. Press and release the Power switch behind the Brewer to turn the Brewer on. Blue lights in the Water Reservoir and LCD Control Center will become illuminated. d. The LCD Control Center will indicate ‘PRIME’ and the Brew button will flash. Please note, a K-Cup® portion pack should NOT be used for the Priming Sequence. e. Press the flashing ‘BREW’ button. h. The one-time priming process is now complete and you are ready to brew! NOTE: The Brewer may take 15-30 seconds to reheat between brews and the LCD Control Center will indicate 'NOT READY'. During this time the pump may cause a vibration noise. This is normal. The LCD Control Center will indicate 'READY TO BREW' once the water has heated and the Brewer is ready. 3. Choose a. Place a cup or mug on the Drip Tray Plate. b. Select a K-Cup® portion pack. Do not remove the foil lid. 4. Brew a. Lift the Handle, place the K-Cup in the K-Cup Holder Assembly and then push the Handle all the way down to puncture the K-Cup. Please be careful to avoid the sharp needles in the K-Cup Assembly Housing & Lid. b. All brew size icons are lit with the default size flashing. To choose a different size, press ‘LEFT’ to go down in size or ‘RIGHT’ to go up in size. NOTE: The small mug (7.25 oz. serving) is the factory set default brew size. To program your favorite brew size, see page 11 in the Use & Care Guide “Programming Your Brew Size”. f. The Brewer will automatically fill (priming it) and then the water will be heated. This will take about 4 minutes. During the heating period the ‘NOT READY’ indicator will be on. When the water is heated ‘BREW’ will be c. Once size is chosen, press ‘BREW’ button. Brew but- displayed and the Brew button will flash. ton will stop flashing and icon of brew size will be lit. g. Press the ‘BREW’ button to start a cleansing brew, during which hot water will flow into your cup or NOTE: Choosing a smaller cup size will brew mug. Discard the hot water. stronger tasting coffee/tea/hot cocoa. Please consult the Use & Care Guide for additional information on your Brewer. If you are experiencing problems, contact Customer Service at 1-866-901-BREW (2739). Part #: 60-200726-001 © 2006 Keurig Incorporated Revision B, June 2006 Guide de demarrage Laissez-vous charmer SANS TARDER! Merci d’avoir achete une cafetiere Platinum B70 de KeurigMC, le systeme d’infusion une tasse a la fois pour la maison. IMPORTANT : N’utilisez par votre cafetiere Keurig avant de l’avoir pre...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории