Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
In that case, turn the television set off or move it away from the tape deck. Dubbing only specific portions You can do this only during the normal-speed dubbing. 1 Press x on deck A at the portion you want to skip. Deck B changes to recording pause. 2 Locate the point you want to resume recording on deck A, then stop the tape. 3 Press X PAUSE on deck B to resume dubbing. Recording on both decks in succession —Relay Recording (TC-WE675 only) You can make a continuous recording that starts on a cassette in deck A and ends on a cassette in deck B. 1 Load blank cassettes into both decks. Make sure that record-protect tabs on the cassettes have not been removed. 2 Select the Dolby NR (see page 10). 3 Set DIRECTION MODE to RELAY. 4 Press z REC on deck A. Deck A changes to recording pause. 5 Start playing the program source. 6 Adjust the recording level manually, if necessary (see page 11). 7 Start recording. To record from Press The front side H on deck A The reverse side h on deck B To stop Relay Recording During Press Recording on deck A x on deck A Recording on deck B x on deck B Note Make sure that H on deck B appears in the display. If it doesn’t, press H on deck B once; otherwise, Relay Recording stops when the reverse side of the cassette in deck B finishes. Recording the same source on both decks —Simultaneous Recording (TC-WE675 only) You can record the same source on cassettes in deck A and B at the same time. 1 Load blank cassettes into both decks. Make sure that record-protect tabs on the cassettes have not been removed. 2 Select the Dolby NR (see page 10). 3 Select the side(s) to be recorded on. To record on Set DIRECTION MODE to Only one side g Both sides s 4 Press A+B REC. Both decks change to recording pause. 5 Start playing the program source. 6 Adjust the recording level manually, if necessary (see page 11). 7 Select the side you want to start recording from on both decks. To record from Press The front side H The reverse side h 8 Press X PAUSE on deck B. Simultaneous Recording starts. To stop Simultaneous Recording Press x on both decks. Tip During Simultaneous Recording, X PAUSE and W REC MUTING on deck B control both decks, but not X PAUSE and W REC MUTING on deck A. Recording on a Tape Recording your own program —RMS Dubbing (TC-WE675 only) You can record an RMS program that you’ve created (see “Creating your own program (RMS Play)” on page 8). This function works only at normal speed. 1 Load a recorded cassette into deck A and a blank cassette into deck B. Make sure the record-protect tabs on the cassette in deck B have not been removed. 2 Program tracks on deck A (see Steps 1 to 5 on page 8). 3 Press HIGH/NORMAL once to change the tape deck to dubbing standby. 4 Select the side of the tape in deck B you want to record on. To start recording Press On the front side H On the reverse side h 5 Press RMS/START or X PAUSE on deck B to start RMS Dubbing. To stop RMS Dubbing Press x on deck B. The RMS program remains even after RMS Dubbing stops. Tips • You can insert a blank space of 4 seconds or more on the tape in deck B by pressing W REC MUTING after Step 4. For details, see “Inserting a blank space during recording (Record Muting)” on page 16. • A blank of 10 seconds is automatically inserted on the tape when you start RMS Dubbing if: – you load a new cassette into deck B. – the tape in deck B is completely rewound to its beginning and automatically stopped. Inserting a blank space during recording —Record Muting You can insert a blank space of 4 seconds between the tracks. The blank spaces allow you to locate the start of specific tracks afterwards using the Multi-AMS function (see page 8). You can also use this function to erase unwanted portions on a tape. 1 Follow Steps 1 to 5 of “Recording on a tape” on page 10. Recording starts. 2 Press W REC MUTING where you want to load a blank space. “REC” flashes in the display and a blank is recorded on the tape. After 4 seconds, X lights up and the tape deck changes to recording pause. 3 Press X PAUSE to resume recording. Tip If you want to insert a blank space longer than 4 seconds, hold down W REC MUTING as long as you want. After 4 seconds, “REC” flashes faster. When you release W REC MUTING, X lights up and the tape deck changes to recording pause. Press X PAUSE to resume recording. Using the CONTROL A1II control system This cassette deck is compatible with the CONTROL A1II Control System. The CONTROL A1II control system was designed to simplify the operation of audio systems composed of separate Sony components. CONTROL A1II connections provide a path for the transmission of control signals that enable automatic operation and control features usually associated with integrated systems. Currently, CONTROL A1II connections between a Sony MD deck, CD player, amplifier (receiver), and cassette deck provide automatic function selection and synchronized recording. In the future the CONTROL A1II connection will work as a multifunction bus allowing ...
Эта инструкция также подходит к моделям:Кассетные деки - TC-WE675 (211.66 kb)