When installation is complete, the trim should be gently cleaned with soft cloth and either alcohol or glass cleaner. Do not overtighten nuts, overtightening can create visible dimples on the plated surface. To Install Door Trim: 1. Remove the trim pieces and hardware from its packaging and ensure that all pieces are present before beginning installation. Take care not to scratch finished surfaces. 2. Open right and left side door. The side doors swivel open towards the back of the insert. See F

3. Remote On/Off Button - The button on the top left (see A) is the on/off power button. When pressing this button you will hear a beep, this will activates the power to the fireplace. You must then press the display button (C) to activate the lights. Note: If the flame does not come on immediately, adjust brightness and intensity (buttons E & K). 4. To increase the brightness, press and release the light brighten button (see E). Each time you press this button you will hear a beep, and the brig

inserT Pre-insTallaTion PreParaTion Install the two 3” (76mm) long bolts (with the head up) through the nuts attached to the insert on the lower rear corner of each side. This will allow you to level the insert when placed into the fireplace. Measure from the front of the top surround mount to the center of the flue. Determine if there is an alignment problem in connecting a liner from the chimney to the insert’s flue. If there is an alignment problem, connection can be made using a short piece