Войти:
Оценок - 4, средний балл: 3.5 ( )

Инструкция по эксплуатации Matsushita, модель LSM40-2

Производитель: Matsushita
Размер: 323.94 kb
Название файла: 38f26afd-83bc-4b61-9897-53a69328c015.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


Step 2 Adjust the L-bracket to the height needed for this installation (slot allows up to 1 inch vertical adjustment). When you are satisfi ed that the screen will stand stable in front of the fi replace, then tighten the nuts on both sides. 750,184M REV. B 05/2006 LENNOX HEARTH PRODUCTS KITS AND ACCESSORIES Figure 1 Kit Contents: Tools Required: 1 Ea. Screen Assembly 2 Ea. Bottom Legs 2 Ea. Long Screws 2 Ea. Short Screws 2 Ea. Long Spacers 7/32” Allen Wrench 7/16” Nut Driver H5051 DASK-LSM40-2 Dual Arch Screen Kit, LSM40-2 H5052 SK-LSM40-2 Classic Screen Kit, LSM40-2 H5053 ASK-LSM40-2 Arch Screen Kit, LSM40-2 H5054 DASK-LSM45-2 Dual Arch Screen Kit, LSM45-2 H5055 SK-LSM45-2 Classic Screen Kit, LSM45-2 H5056 ASK-LSM45-2 Arch Screen Kit, LSM45-2 These optional decorative freestanding fi rescreen panels are designed to enhance the beauty of the fi replace and helps prevent direct human contact with the hot glass surface. A chain is also provided for additional safety. When attached to the fi replace, it helps prevent the screen from tipping. NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. Long Screws Short Screws Long Spacers Short Spacers Nuts L- Brackets Contoured Legs Dual Arch Screen Screen Arch Screen L- Bracket Nut Screen Assembly Short Spacer Long Spacer Contoured Leg Figure 2 - Assemble Legs & L-Brackets to Screen Side View Front Side Fireplace Side Assembly Completed 1 WARNINGS Hot! Do not touch! These decorative screen panels are NOT heat guards. The glass behind the screens will be hot during operation and will retain heat for a while after shutting off the appliance. Severe burns may result. Carefully supervise children in the same room as appliance. • As with any similar heating appliance, surfaces of the frame, the door and appliance can become very hot. Kit Contents (dual arch screen shown) Screen Assembly Chain Instruction Sheet Chain GENERAL INFORMATION INSTALLATION INSTRUCTIONS FOR DECORATIVE SCREEN KITS FOR USE WITH MONTEBELLO® DAVE LENNOX SIGNATURE SERIES MODELS LSM40-2 & LSM45-2 DIRECT VENT GAS FIREPLACES INSTALLATION INSTRUCTIONS Step 1 Using a 7/32” allen wrench and 7/16” nut driver, loosely assemble the parts as shown in Figure 1 and Figure 2 (do not tighten yet). Step 2 Adjust the L-bracket to the height needed for this installation (slot allows up to 1 inch vertical adjustment). When you are satisfi ed that the screen will stand stable in front of the fi replace, then tighten the nuts on both sides. 750,184M REV. A 04/2006 LENNOX HEARTH PRODUCTS KITS AND ACCESSORIES Figure 1 Kit Contents: Tools Required: 1 Ea. Screen Assembly 2 Ea. Bottom Legs 2 Ea. Long Screws 2 Ea. Short Screws 2 Ea. Long Spacers 2 Ea. Short Spacers 4 Ea. Nuts 2 Ea. L- Brackets 1 Ea. Instruction Sheet 7/32” Allen Wrench 7/16” Nut Driver H2229 DASK-LSM40 Dual Arch Screen Kit, LSM40-2 H2230 SK-LSM40 Screen Kit, LSM40-2 H2231 ASK-LSM40 Arch Screen Kit, LSM40-2 H2232 DASK-LSM45 Dual Arch Screen Kit, LSM45-2 H2233 SK-LSM45 Screen Kit, LSM45-2 H2234 ASK-LSM45 Arch Screen Kit, LSM45-2 These optional decorative freestanding fi rescreen panels are designed to enhance the beauty of the fi replace and helps prevent direct human contact with the hot glass surface. A chain is also provided for additional safety. When attached to the fi replace, it helps prevent the screen from tipping. NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. Long Screws Short Screws Long Spacers Short Spacers Nuts L- Brackets Contoured Legs Dual Arch Screen Screen Arch Screen L- Bracket Nut Screen Assembly Short Spacer Long Spacer Contoured Leg Figure 2 - Assemble Legs & L-Brackets to Screen Side View Front Side Fireplace Side Assembly Completed 1 WARNINGS Hot! Do not touch! These decorative screen panels are NOT heat guards. The glass behind the screens will be hot during operation and will retain heat for a while after shutting off the appliance. Severe burns may result. Carefully supervise children in the same room as appliance. • As with any similar heating appliance, surfaces of the Kit Contents frame, the door and appliance can become very hot. (dual arch screen shown) Screen Assembly Chain Instruction Sheet GENERAL INFORMATION INSTALLATION INSTRUCTIONS FOR DECORATIVE SCREEN KITS FOR USE WITH MONTEBELLO DAVE LENNOX SIGNATURE SERIES MODELS LSM40 & LSM45 DIRECT VENT GAS FIREPLACES INSTALLATION INSTRUCTIONS Step 1 Using an 7/32” Allen Wrench and 7/16” Nut Driver, loosely assemble the parts as shown in Figure 1 and Figure 2 (do not tighten yet). Step 2 Adjust the L-Bracket to height needed for this installation (slot allows up to 1 inch vertical adjustment). When you are satisfi ed that the screen will stand stable in front of the fi replace, then tighten the nuts on both sides (snug only - do not over tighten). Step 3 Place the assembled freestanding screen in front of the fi replace when in use, in a close proximity to the glass door assembly. 750,184M REV. NC 3/2005 LENNOX HEARTH PRODUCTS KITS AND ACCESSORIES Figure 1 - Kit Contents (dual arch sc...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории