Оценок - 4, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
4 Wire Gauge: Power Cord 14AWG Heater Element 16AWG Other Wire 18AWG Model: SFE23RE, SFE33RE Voltage: 120 VAC, 60 Hz Total Amps: 11.5 Amps Total Watts: 1380 Watts Heater Rating: 1200 Watts Operating Instructions Before programming your transmitter you must first insert three triple “AAA”batteries. Make sure the main power on/off swith is in “ON” position. 1. The Mode setting: Press the “SET”button, then the “AUTO”light will flash. Press the “SET”button again, and then the “MANUAL”light will also flash. The “AUTO”light and the “MANUAL”light will flash alternately and continuously. Next press “ENTER” button to select the auto mode or manual mode. a. When selecting “AUTO”mode: Select “AUTO”and press the “ENTER”button to activate , then press the “SET”button, next the ‘Temperature’, ‘Flame’, ‘Light’, ’lamp’symbols will flash alternately. Next press the button or the button to select the desired temperature setting. When the temperature setting has been selected, press the “SET” button to lock in the temperature setting, next set the following functions that appear on the transmitter. When the last function setting has been completed, press the “ENTER”button, and the symbols will stop flashing. b. When selecting “MANUAL”mode: Select “MANUAL”and press the “ENTER”button to confirm, then press the “SET”button, the ‘Flame’, ‘Light’, ‘lamp’, ‘Heating level’symbols will flash alternately. The next symbol will flash automatically set the functions as they appear. When the last function setting has been completed, press the “ENTER”button, and the symbols will stop flashing. 5 Heater Front View Remote Control Front Remote Control Back (Adaptor NOT permitted in Canada) 6 6. Flame Effect setting: (1) Flame speed After selecting MANUAL mode or AUTO mode, the flame symbol will flash, for slow flame effect, press button, for faster flame effect, press button. (2) Flame brightness Press “SET”button, when the lamp symbol flashes, press button to decrease the flame brightness and button to increase the flame brightness. 7. For Flame Effect only: Select MANUAL mode, then set the Heating level to no heating level or select AUTO mode and then set temperature to lowest setting. 8. Manual ON/OFF button If you can’t find your Remote Control or the Remote Control is damaged, you can use manual ON/OFF button to manual turn on/turn off your heater. 2. The Clock setting : Press the “CLOCK”button, the figure shown on clock will flash. Press or to set the hour. After the hour has been set, press the “CLOCK”button again to set the minutes. After the minutes has been set, press the “CLOCK” button, the clock will indicate the set time. 3. The Timer setting : Press the “TIMER”button, the word “TIMER”will appear on the transmitter, next press or to adjust the time, to add 30 minutes increments press the button again. After the timer has been set, press “TIMER”button again, the word “TIMER”will flash and the timer will return to time. 4. Key-Press Lock setting (child proof): To lock, p...
Эта инструкция также подходит к моделям:Камины - PRO-COM SFE23RE-C (1.85 mb)
Камины - PRO-COM SFE23RE-DO (1.85 mb)
Камины - PRO-COM SFE23RE-O (1.85 mb)
Камины - PRO-COM SFE23RE-W (1.85 mb)