Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
Black Clean Faced Panel Kits CATALOG NO. / MODEL NO. AND NUMBER OF SETS Unit Model No. for 24 in. wide Glass Door for 40 in. wide Glass Door 80L79 CFPKE-60 80L77 CFPK-6/60 CDST -2 CDPF 1 2 CDCR CDCL 1 1 Rocker Switch Kit 80L41 FRS Optional Unit Mounted Rocker Switch An optional rocker switch kit can be installed directly on all Millivolt Gas Valve Equipped Multi-Open Series appliances to provide for On and Off operation in lieu of a wall switch. This kit is designed to install in the lower control compartment out of view and is perfect for use in high volume areas such as lobbies and model homes where limited access to the appliance On/Off switch is desirable. This kit can be retrofitted to previously installed appliances and may be temporarily installed in place of other switch circuitry. Hood Kits CATALOG NO. / MODEL NO. AND NUMBER OF SETS Unit Model No. Polished Brass Finish Brushed Stainless Finish for 24 in. wide Glass Door for 40 in. wide Glass Door for 24 in. wide Glass Door for 40 in. wide Glass Door 80L55 HKE-60B 80L53 HK-6/60B 80L63 HKE-60P 80L61 HK-6/60P CDST -2 -2 CDPF 1 2 1 2 CDCR CDCL 1 1 1 1 Clean Faced Panel Kit A clean faced panel kit is available to convert the standard louvered appliances to radiant models more suited for finishing around the firebox opening with non-combustible materials such as tile. Polished Brass and Brushed Stainless Hood Kits Attractive hoods are available in two styles to be used on the Multi-Open Series appliances. These hoods are designed to be fitted to the glass viewing sides of the appliance. In addition to providing an aesthetically pleasing appearance to your appliance installation, the hood reduces heat effects to decorative mantles and finish materials located above the fireplace opening. The hood kit replaces the standard hood that comes with these appliances and snaps into place. These kits can be retrofitted to previously installed appliances. NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. ACCESSORY COMPONENTS CONTINUED Door Frame Kits (2-Piece, Top and Bottom) Two types of decorative door frame kits are available for use with these appliances - one, in polished brass finish; the other, in brushed stainless steel finish. The DTK is designed to attach directly to the front face of the appliance at the glass enclosure panels top and bottom edges. The DTK provides a touch of elegance to the appliance. The door frame kit can be retrofitted onto previously installed appliances. Door Frame Kits (2-piece) CATALOG NO. / MODEL NO. AND NUMBER OF SETS Unit Model No. Polished Brass Finish Brushed Stainless Finish for 24 in. wide Glass Door for 40 in. wide Glass Door for 24 in. wide Glass Door for 40 in. wide Glass Door 26M94 DTKE-6B 19M89 DTK-6B 26M95 DTKE-6BS 19M90 DTK-6BS CDST -2 -2 CDPF 1 2 1 2 CDCR CDCL 1 1 1 1 Louvers Kits Decorative louvers are available for use with Multi-Open Series fireplaces. These louvers are designed to replace the standard black louvers that are provided with the appliance or ...
Эта инструкция также подходит к моделям:Камины - NEC-FPDC (1.49 mb)
Камины - NEC-FPDC (1.49 mb)
Камины - NEC-FPDC (1.49 mb)
Камины - NEC-LCDC (1.49 mb)