Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
The use of any part that is NOT factory authorized can be dangerous and will void your warranty. Storage of this outdoor fireplace indoors is permissible only if the tank is disconnected, removed from the outdoor fireplace and properly stored outdoors. Do not attempt to disconnect the gas regulator from the tank or any gas fitting while the outdoor fireplace is in use. If the outdoor fireplace is not in use, the gas must be turned off at the supply tank. The pressure regulator is set for 10.5 inches of water column (pressure). The maximum inlet gas pressure for this outdoor fireplace is 11 inches of water column pressure. Do NOT sit on the mantle when the unit is in operation. Do not throw anything onto the fire when the unit is in operation. Fire logs and lava rock are very hot, please keep the children or pets away at a safe distance. The opening of the tank collar should face toward the door side for easy access. Do NOT store any combustible materials in the base enclosure. page no. Exploded View Parts List 1 Cement Log (4) 55-05-432, 55-05-433, 55-05-434, 55-05-435 2 Lava Rock 55-05-443 3 Lava Rock Grid 55-05-444 4 Side Panel (6) 55-05-688 5 Bowl Assembly 55-05-430 6 Burner 55-05-431 7 Igniter 55-05-441 8 Control Knob 55-05-436 9 Regulator/Hose Assembly 55-05-452 10 Hearth 55-05-689 11 Back Leg (2) 55-05-694 12 Middle Support Leg (3) 55-05-702 13 Tank Guard 55-05-458 14 LP Gas Tank Retaining Chain 55-05-447 15 LP Gas Tank Tray Peg 55-05-449 16 Base Support Bar 55-05-429 17 Left Front Leg 55-05-700 18 Left Door 55-05-690 19 Door Support Leg 55-05-698 20 Right Door 55-05-691 21 Right Front Leg 55-05-704 22 Door Knob (2) 55-05-697 23 Base 55-05-428 24 LP Gas Tank Tray 55-05-448 25 LP Gas Tank Shield 55-05-458 26 Foot (4) 55-05-692 27 Cover (not shown) 55-05-693 1 2 3 6 4 5 4 7 8 9 4 4 25 10 11 13 11 12 16 12 4 14 12 4 26 15 26 21 20 19 18 17 26 22 26 23 24 Hardware A Screw M5x10 Black Nickel Plated Hex 9 pcs B Screw M5x10 Black Nickel Plated Truss Head 68 pcs C Screw o4x16 Black Nickel Plated Truss Head 2 pcs D Wing Nut o5 Black Nickel Plated 3 pcs E AA Battery 1.5 V AA Battery 1 pc Tools Required for Assembly (Included) M5 Allen Wrench Tools Required for Assembly (Not Included) #2 Phillips Head Screwdriver Assembly Instructions DO NOT RETURN PRODUCT TO STORE. For assistance call 1.800.762.1142 toll free. Please have your owner’s manual and serial number available for reference. For Easiest Assembly: • To avoid losing any small components or hardware, assemble your product on a hard level surface that does not have cracks or openings. 1 Attach Bowl Assembly B x 4 2 Attach LP Gas Tank Shield B x 4 6 Attach Base and Feet Attach Base and Feet B x 18 5 Attach Side Panels, Right Front Leg and Middle Support Leg A x 2 B x 12 Assembly Instructions (continued) 10 Attach Doors C x 2 9 Attach Base Support Bar B x 2 11 Place Wood Grid and Lava Rocks Do NOT dump lava rocks out of package. Carefully place lava rocks by hand so dust does not clog burner. Place Cement Logs 12 Insert Battery E x 1 Installing LP Gas Tank To operate you will need (1) precision-filled standard grill LP gas tank (20#) with external valve threads. Note: An empty standard grill LP gas tank weighs approximately 18 lbs. A precision-filled standard grill LP gas tank should weigh no more than 38 lbs. Need a tank of gas? Try tank exchange service. It’s easy, fast, safe, and available at tens of thousands of conveniently located retail outlets nationwide. You can purchase a new full tank or exchange your empty for a precision filled one. Insert LP Gas Tank WARNING: Make sure LP gas tank valve is closed. Close by turning valve clockwise. Place precision filled LP gas tank upright into hole in outdoor fireplace body so it is arranged for vapor withdrawal. Secure LP Gas Tank Secure tank by sliding tank retainer chain around the LP gas tank and insert peg into LP gas tank tray. Note: Peg must be inserted into LP gas tank when tank is in LP gas tank tray. Connect LP Gas Tank Before connecting, be sure that there is no debris caught in the head of the LP gas tank, head of the regulator valve or in the head of the burner and burner ports. Connect gas line to tank by turning knob clockwise until it stops. Disconnect LP Gas Tank Before disconnecting make sure the LP gas tank valve is OFF. Disconnect gas line to tank by turning knob counterclockwise until it is loose. Operating Instructions Checking for Leaks WARNING: Before using this outdoor fireplace, make sure you have read, understand and are following all information provided in the Dangers and Warnings presented on page 2. Failure to follow those instructions can cause death, serious injury or property damage. Burner Connections Make sure the regulator valve and hose connections are securely fastened to the burner and the tank. If your unit was assembled for you, visually check the connection between the burner pipe and orifice. Make sure the burner pipe fits over the orifice. WARNING: Failure to inspec...