Note: After repeated use, a slight discoloration of the metal may occur. Owner’s manual and assembly instructions: model 252726 portable outdoor fireplace 4/02 3 Owner’s manual and assembly instructions: model 252726 portable outdoor fireplace 4/02 Contact 1-800-762-1142 for assistance. Do not return to place of purchase. Assembly Instructions For Best Results: Remove all contents from packaging and make sure all parts are present before attempting assembly. While assembling, tighten all bolt connections by hand first. Then, when the fireplace is fully assembled, go back and tighten with wrenches. Step 1 Attach two adjustable leg cups (14) to two front legs (7) using two adjustable leg-cup bolts (A), and attach legs together using front axle (12), wing nuts (C) and small washers (G), as shown. Make sure the rim of the cup faces downward when attached, and bottom of cup touches end of leg. Step 2 Attach two back legs (8) together using wheel axle (11), and attach wheels (15) to ends of axle using wheel standoffs (I), wheel washers (F), and wheel nuts (D), as shown. Install wheel decals (16) on wheels (15). Step 3 Attach first set of clips (17), to each of the four legs at the lowest horizontal marking, as shown. Assure that the clips are attached with the directional arrow facing upwards. Owner’s manual and assembly instructions: model 252726 portable outdoor fireplace 4/02 4 Contact 1-800-762-1142 for assistance. Do not return to place of purchase. Step 4 Slide the legs support (6) onto four legs, as shown. The support should rest on previously installed clips. NOTE: Make sure broad opening of cone faces downward when assembling the leg-support bracket. Crossbar position may vary, but will not affect product’s performance. 6 Step 5 Attach second set of clips (17), to each of the four legs at higher horizontal markings, as shown. Assure that the clips are attached with the directional arrow facing upwards. 17 5 Owner’s manual and assembly instructions: model 252726 portable outdoor fireplace 4/02 Contact 1-800-762-1142 for assistance. Do not return to place of purchase. Step 6 Slide the bottom bowl support (5) onto four legs, as shown. The support should rest on previously installed clips. Assure that the angular side of the support is positioned forward (away from the wheels), as shown. NOTE: Make sure broad opening of cone faces downward when assembling the bottom bowl-support bracket. Crossbar position may vary, but will not affect product’s performance. (5). 5 Step 7 Slide bottom bowl (2) onto four legs, as shown, through holes in edge of bowl. Bowl will rest in bottom bowl support. 2 Owner’s manual and assembly instructions: model 252726 portable outdoor fireplace 4/02 6 Contact 1-800-762-1142 for assistance. Do not return to place of purchase. Step 8 Insert charcoal grid (13) into bottom bowl, as shown. Grid will rest on internal lip of bowl. Note: before using the fireplace, fill the bottom bowl with play sand up to a level just below the charcoal grid lip. 13 Step 9 Install three spark guards (3) on legs, closing off back, and two sides of fireplace. Install by sliding tabs in spark guards into slots in legs, as shown. Next install spark guard door (4) closing off front of fireplace. Install by sliding tabs in door into slots in legs, as shown. A 3 4 Step 10 Attach pre-assembled lid handle (9) to top lid (1), using lid handle bolts (B), lid handle heat resistant washers (H), small washers (G), lid handle lock washers (J), and wing nuts (C), as shown. Place top lid with handle attached onto fireplace by putting tops of legs either into holes or indentations in edge of top lid. C J G 9 B H 1 7 Owner’s manual and assembly instructions: model 252726 portable outdoor fireplace 4/02 Contact 1-800-762-1142 for assistance. Do not return to place of purchase. Step 11 Insert front handle (10) into holes in angular section of bottom bowl support (5), as shown. 10 5 Fully Assembled Owner’s manual and assembly instructions: model 252726 portable outdoor fireplace 4/02 8 Contact 1-800-762-1142 for assistance. Do not return to place of purchase. Operating your outdoor fireplace Before lighting: · Always use in accordance with all applicable local and national fire codes. Use on noncombustible surfaces such as concrete, brick, or rock. Use extreme caution when using on a wooden deck. Do not leave unit unattended at any time. Keep all screws and nuts tight, and inspect on a regular basis to be sure fireplace is in safe working condition. · Keep away from flammable material and fluids such as gasoline, alcohol, diesel fuels, kerosene, charcoal lighter fluid, and / or automobiles. · Do not overload the fireplace to the point that the lid will not close properly. · Do not burn trash, leaves, paper, cardboard, or plywood in the fireplace. Avoid using softwood such as pine or cedar, because they are likely to throw sparks. The use of seasoned hardwood is recommended. · Do not use flammable fluids such as gasoline, alcohol...