PRICE HUM 4069601 $1939.60 Specifications: Display: 480V x800H, 8" Diagonal, 65,000 Color TFT Transducer Standard: Side Imaging/DualBeam PLUS Depth Capability: Side Imaging:150 ft Down; 240 ft each side; DualBeamPlus: 1500 ft w/ Standard Transducer;Target Separation: 2-1/2 inches Temperature: Included in Transducer Speed: GPS Speed Included Unit Mounting: Gimbal or In-Dash Unit SizeInstalled (Gimbal): 11-1/4" Wx6-3/4" Hx4-1/4"D Unit SizeInstalled (In-dash) 10-3/4" Wx6"Hx1-3/8" D; Required Minimu

If you wish assistance from the factory, contact us: • Click through our website at • Call us toll free in the United States 800.722.0500/ direct 818.407.2428 • Write us: Attention: Customer Service Califone International Inc. 1145 Arroyo Ave. Suite #A, San Fernando, CA 91340 Be sure to have the model and serial number available. Please DO NOT SHIP ANY UNIT TO THE FACTORY WITHOUT PRIOR AUTHORIZATION AND INSTRUCTIONS FROM CALIFONE. SPECIFICATIONS Number of Listening Positions 6 Number of Micropho

Also, in very deep water, it may be necessary to manually increase the sensitivity setting to maintain a graphic depiction of the bottom. If you are using a transducer switch to connect two transducers to the unit, ensure the switch is in the correct position to connect a transducer that is in water. (If a trolling motor transducer is selected and the trolling motor is out of water, no sonar information appears.) It none of the above solve the problem, inspect the transducer cable from end to en

ACCESSORIES Humminbird offers a wide assortment of accessories that complement and expand the capability of your new fishfinder. These accessories are designed with the same high standards and are backed by the same one-year warranty. The Humminbird Accessory catalog included with your unit contains descriptions of the many accessories available and ordering information. All Humminbird accessories are available through your full- service Humminbird dealer or factory direct through our number lis

1. At the identified mounting location, lay the transducer body face down with the pointed end towards the bow. 2. Fill the hull with enough water to submerge the transducer body. Use a sand filled bag or other heavy object to hold the transducer in position. The transducer cannot transmit through air. The water purges any air from between the transducer and the hull and fills any voids in the coarse fiberglass surface. INSTALLATION INSIDE THE HULL INSTALLATION 3. Power up the Control Head. 4. R

You can organize files, and transfer music to your player during USB connection. 1 Click and highlight one or more songs to transfer between the player and the computer. 2 Use drag and drop actions to complete your transfer. Tip To transfer music CDs to the player use software such as Musicmatch Jukebox or Windows Media Player, rip (convert) the songs on your music CD into MP3/WMA files. Copy the files into the digital audio player via Windows Explorer. Free versions of these programs can be dow

320 V x 240 H Transducer...................................................................................................... XHS-9-20-T Transducer Cable Length ............................................................................ 20 ft (6 m) Current Draw .............................................................................................. 0.383 Amps NOTE: Humminbird® verifies maximum stated depth in saltwater conditions, but actual depth performance may vary due to transducer i

The Upper Range menu choice is available when User Mode is set to Advanced (see Setup Menu Tab: User Mode) and can only be accessed from the Sonar, Split Sonar, Big Digits and Circular Flasher views. Upper Range is often used with Lower Range. For example, if you are only interested in the area between 20 and 50 feet deep, you should set the Upper Depth Range to 20 and the Lower Depth Range to 50. The Sonar View will then show the 30 foot area between 20 and 50, and will not show the surface or

The Zoom Preview Box shows where the zoomed view is in relation to the full range view. The Zoom Level, or magnification, is displayed in the lower left corner and can be changed to suit conditions (see Sonar X-PressTM Menu: Zoom Level). Upper and Lower Zoom Depth Range numbers indicate the depth of the water which is being viewed. Digital depth is displayed in the upper left hand corner. The digital readouts in the Sonar Zoom View cannot be customized; therefore, information such as water tempe

Structure ID® represents weak returns as light pixels and strong returns as dark pixels. This has the benefit of ensuring that strong returns will be clearly visible on the display. WhiteLine® highlights the strongest sonar returns in white resulting in a distinctive outline. This has the benefit of clearly defining the bottom on the display. Bottom Black displays all pixels below the bottom contour as black, regardless of signal strength. This has the benefit of providing a high contrast betwee