Оценок - 3, средний балл: 3.7
(
)
)
|
Фото и характеристики Garmin FISHFINDER 400C |
К этому устройству также есть другие инструкции:
Эхолоты - Fishfinder 400C (641.33 kb)
Эхолоты - Fishfinder 400C (1.27 mb)
Фрагмент инструкции
NOtE: When you turn on the Fishfinder 400C for the first time, you have to select a language, transducer type, units of measure, and color scheme. Adjusting the Backlight Setting 1. Press and release the POWER key. 2. Press left on the ROCKER to decrease the brightness; press right to increase. Using Simulator Mode If a transducer is not connected, no data is shown on the screens. By turning on Simulator Mode, the Fishfinder 400C acts as though a transducer is connected. Use Simulator Mode to practice and learn how to use your Fishfinder 400C. CAUtION: When in Simulator Mode, the depth, temperature, and speed information are simulated. They do not represent the actual depth, water temperature, or vessel speed. Fishfinder 400C Owner’s Manual Using the Fishfinder 400C Keypad MENUHOMESELECT Power/ Backlight Range (-/+) ROCKER SELECT MENU HOME POWER/BACKLIGHT—Press and hold to turn the unit on or off; press and release to adjust the backlight and day/night modes. RANGE (-/+)—Press to adjust the range of the sonar. ROCKER—Press up, down, left, or right to move through menus, highlight fields, and enter data. SELECT—Press to select highlighted items and confirm on- screen messages. HOME—Press to return to the Home screen. MENU—Press to access additional settings and configuration options; Press to return to the previous screen when indicated. BasIc operatIon Understanding the Home Screen When you turn on your Fishfinder 400C, the Home screen appears. Press up or down on the ROCKER, and then press SElECt to choose an option. NOtE: Options on this screen vary based on the type of transducer installed. Home Screen (Dual Beam) Home Screen (Dual Frequency) Full Screen Opens a full-screen graph of the transducer’s sonar readings (page 17). Flasher (Dual Beam transducer only) Opens a round flasher to indicate the transducer’s sonar readings as an alternative to the linear graph (page 18). Split Freq (Dual Frequency transducer only) Opens a split-screen that uses the full capability of the dual frequency transducer. A50kHz frequency graph appears on the left; a 200kHz frequency graph appears on the right (page 18). Split Zoom Opens a split-screen with the normal graph on the right zoomed to your preferred level on the left (page 17). Numbers Opens a set of data fields to show information numerically (page 19). Temp Log Shows a customizable graph of the water temperature when using a compatible transducer or sensor (page 19). Configure Configure unit settings (page 20). Fishfinder 400C Owner’s Manual BasIc operatIon Understanding the Full Screen The Full Screen is the main screen for both dual beam and dual frequency transducers. On the Home screen, highlight Full Screen, and press SElECt. Depth Temperature Speed Suspended targets Range Transducer mode Bottom Understanding the Split Zoom Screen Use the Split Zoom screen to view the full sonar data from the graph as well as a zoomed in portion on the same screen. On the Home screen, highlight Split Zoom Screen, and press SElECt. Depth, temperature, and speed Zoomed depth scale Range Transducer mode Zoom window Fishfinder 400C Owner’s Manual BasIc operatIon Understanding the Flasher Screen The Flasher screen (dual beam transducer only) provides an almost instantaneous return of what is below your boat. The depth scale is organized as a ring that starts at the top, or 12:00, and progresses clockwise. Sonar information flashes on the ring when it is received at the depth indicated on the inside ring. Like the regular graph, The colors indicate different strengths of the sonar return. On the Home screen, highlight Flasher, and press SElECt. Voltage Water Temp Flasher ring Depth Water Odometer speed Understanding the Split Freq Screen Use the Split Freq screen (dual frequency transducer only) to view both the 50kHz and 200kHz frequencies on the same screen. On the Home screen, highlight Split Freq, and press SElECt. Depth, temperature and speed Range Frequencies Fishfinder 400C Owner’s Manual BasIc operatIon Understanding the Numbers Screen The Numbers screen shows data fields populated by important numeric information instead of a graph. The data fields you see are determined by the capabilities of your transducer. On the Home screen, highlight Numbers, and press SElECt. All transducers show depth. If you are using a temperature-capable transducer, the Water Temp field appears. If you are using a speed- capable transducer, the Water Speed and Odometer fields appear. Fishfinder 400C Owner’s Manual Understanding the Temp Log Screen If you are using a temperature-capable transducer, the Temp Log screen keeps a graphic log of temperature readings over time. The current temperature and depth are shown in the top left corner. On the Home screen, highlight temp log, and press SElECt. Temp and depth Temp rangeTime elapsed The temperature appears along the right side and the time elapsed appears along the bottom. The graph scrolls to the left as information is received. BasIc operatIon...