Оценок - 4, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
e Make sure the squelch is closed to start a r Push [SCAN] to start Priority or Normal scan. • “ ” blinks during Priority scan; “ ” blinks during Normal scan. • When a signal is detected, scan pauses until the signal disappears or resumes after pausing 5 sec. according to Set mode setting. (Channel 16 is still monitored during Priority scan.) • Push [Y] or [Z] to check the scanning TAG channels, to change the scanning direction or resume the scan manually. • A beep tone sounds and “ ” blinks at the channel comment indicator when a signal is received on Channel 16 during Priority scan. t To stop the scan, push [SCAN] . 4 to stop the scan PushPush Scan starts. When a signal is received. [Example]: Starting a normal scan. 5 5 H Description Dualwatch monitors Channel on another channel; Tri-watch monitors Channel 16 call channel while receiving another are convenient for monitor operating on another channel. DUALWATCH/TRI-WATCH SIMULATION • If a signal is received on Channel 16, Dualwatch/Tri-watch pauses on Channel 16 until the signal disappears. • If a signal is received on the call channel during Tri-watch, Tri-watch becomes Dualwatch until the signal disappears. • To transmit on the selected channel during Dualwatch/Tri- watch, push and hold [PTT] . Operation q Select Dualwatch or Tri-watch in Set mode. (p. w Select the desired channel. e Push and hold [DUAL] (CH/WX) for 1 sec. to start Dual- watch or Tri-watch. • “ ” blinks during Dualwatch; “ ” blinks during Tri-watch. • A beep tone sounds when a signal is received r To cancel Dualwatch or Tri-watch, push [DUAL] (CH/WX). [Example]: Operating Tri-watch on INT Channel 25 Tri-watch starts. Signal is received on call channel. Signal is received on Channel 16 takes priority. Tri-watch resumes after the signal disappears. Push and hold for 1 sec. The 9-digit MMSI (Maritime ID) code can be programmed This code programming can be q Turn power OFF. w While pushing and holding [DSC] , turn power ON to enter MMSI code programming condition. e After the display appears, release [DSC] . • A cursor starts blinking. r Edit the specified MMSI code by pushing [ Y] or [Z] . • Push [! 6] or [CH/WX] to move the cursor forward or backward, respectively. t Input 9-digit code, then push [DSC] to set the code. • Returns to the normal operation. DSC 6 MMSI code The 9-digit MMSI (DSC self q Push [DSC] to enter the DSC menu. w Push [ Y] or [Z] to select “ ” and push [DSC] . 5 6 e Check the 9-digit MMSI (DSC self ID) code. • The MMSI code is displayed and scrolls at the channel comment indicator. MMSI (DSC self ID) code scrolls r Push [DSC] to return to the normal operation. 6 6 DSC address A total of 30 DSC address IDs and named with up to 5 characters. D Programming address ID q Push [DSC] to enter the DSC menu. w Push [Y] or [ Z] to select “ ,” and push [DSC] . Scrolls e Push [Y] or [ Z] to select “ ,” and push [DSC] . r Push [Y] or [ Z] to input 9-digit of the appropriate ID. • Push [! 6] or [CH/WX] to move the cursor forward or backward, respectively. • Push [SCAN] to cancel and exit the condition. 1st digit ‘0’ is fixed for a group ID. When you input 1st digit and other 8 digits, the ID is automatically registered ID. t After inputting 9-digit ID, push [DSC] to input 5 characters ID name using [Y] or [ Z] . • Push [! 6] or [CH/WX] to move the cursor forward or backward, respectively. • Push [SCAN] to cancel and exit the condition. y Push [DSC] to program and exit the DSC menu. D Deleting address q Push [DSC] to enter the DSC menu. w Push [Y] or [ Z] to select “ D Deleting address q Push [DSC] to enter the DSC menu. w Push [Y] or [ Z] to select “ ” and push [DSC] . Scrolls e Push [Y] or [ Z] to select “ ”, then push [DSC] . • When no address ID is programmed, “ ” is displayed. r Push [Y] or [ Z] to select the desired ID name for deleting and push [DSC] . • “ ” appears. t Push [DSC] to delete the address ID and exit the DSC menu. DSC OPERATION 6 Position indication When a GPS receiver (NMEA0183 2.0 or 3.01) is connected, the transceiver indicates seconds of accuracy. A NMEA0183 ver. 2.0 or 3.01 (sentence formatters RMC, GGA, GNS, GLL) compatible GPS receiver Ask your dealer about suitable GPS receivers. 6 . Push and hold [POS] (DSC) for 1 sec. to display the current position. • ‘Latitude’ and ‘Longitude’ scroll in sequence at the channel comment indicator. • “ ” scrolls when no GPS is connected. Scrolls • When the connecting GPS receiver is compatible with several sentence formatters, the order of input precedence is ‘RMC,’ ‘GGA,’ ‘GNS’ and ‘GLL.’ • “ GPS” blinks when the GPS data is invalid. 6 6 Distress call A Distress call should be transmitted Master, the ship or a person is in distress assistance. NEVER USE THE DISTRESS CALL WHEN YOUR SHIP OR A PERSON IS NOT IN AN EMERGENCY. A DISTRESS CALL CAN BE USED ONLY WHEN IMMEDIATE HELP IS NEEDED. q Confirm no Distress call is being received. w While opening the key cover, push [DISTRESS] for 5 sec. to transmit the Distress c...
Эта инструкция также подходит к моделям:Эхолоты - IC-M304 (1.24 mb)