Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
(305 kg) • • • • Hourmeter • • • • Under-hood muffler • Counterweight, 659 lb. (299 kg) • • • • Instrumentation lights Hydraulic System • Counterweight, 1,257 lb. (570 kg) • • • • Monitor system: Preheat indicator / • • • • Auxiliary function foot control • Counterweight, 1,323 lb. (600 kg) Engine oil pressure indicator / • • • • Auxiliary hydraulic lines with • • • • Hinged service-access doors Alternator voltage indicator / Fuel quick-couplers to end of boom • Independent-swing boom gauge and fuel level indicator / Engine • • • • Auxiliary return-flow selector valve (65-degree left, 50-degree right) coolant temperature gauge and engine • • • • Axial-piston swing motor • • Independent-swing boom coolant temperature indicator / • • • • Boom-swing foot control (66-degree left, 66-degree right) Hourmeter / Operating lights • • • • Excavator-to-backhoe control • Independent-swing boom indicator / Operating lights switch pattern change valve (60-degree left, 80-degree right) • • • • Motion alarm with cancel switch • • • Open center with two variable- • • • • Toolbox • • • • Propel pedals and levers displacement pumps and one • • • • TOPS/FOPS canopy • • • • Two travel modes with foot fixed-gear pump • • • • Vandal locks for service doors, selection switch • Closed center load sensing with fuel cap, toolbox, and monitor panel • • • • Seat belt, 2 in. (51 mm), retractable one variable-displacement and • • • • Zero-tail-swing configuration • • • • Vinyl seat with fore/aft adjustment one fixed-gear pump Front Attachments А А А Cab with air conditioning • • • • Hydraulic pilot controls for boom, • Arm, 3 ft. 1.0 in. (930 mm) А А А Cab with heater arm, bucket, swing, boom swing, • Arm, 3 ft. 10.0 in. (1170 mm) А А А А Front screen blade, and auxiliary functions • Arm, 4 ft. 2.0 in. (1265 mm) А А Rear secondary exit kit • • • • Wet-disc swing brake • Arm, 4 ft. 5.0 in. (1340 mm) А А А Suspension seat Undercarriage • • • • Articulation hose shield Electrical • • • • Planetary final drive • Backfill blade, 4 ft. 4 in. (1350 mm) • • • • 12-volt accessory outlet • • • • Propel motor shield • Backfill blade, 5 ft. 1 in. (1550 mm) • • • • Alternator, 35 amp • Rubber track, 9 in. (230 mm) • Backfill blade, 5 ft. 8.5 in. (1740 mm) • • • • Low-maintenance battery • • Rubber track, 12 in. (300 mm) • Backfill blade, 6 ft. 7 in. (2000 mm) • • • • Blade-type multi-fused circuits • Rubber track, 16 in. (400 mm) • • Boom, 6 ft. 10.5 in. (2100 mm) • • • • Positive-terminal battery covers • • • • Two-speed axial-piston propel motors • Boom, 8 ft. 0.5 in. (2450 mm) Lights • Boom, 9 ft. 2 in. (2800 mm) • • • • Work lights: Halogen / One mounted on frame / One mounted on boom CONTROL OWNING AND OPERATING COSTS Customer Personal Service (CPS) is part of John Deere's proactive, fix-before-fail strategy on machine maintenance that will help control costs, increase profits, and reduce stress. Included in this comprehensive lineup of ongoing programs, and services are: Flud analysis program—tells you what's going on inside all of your machine's major components so you'll know if there's a problem before you see a decline in performance. Fluid analysis is included in most extended coverage and preventive-maintenance agreements. Component life-cycle data—gives you vital information on the projected life span of components and lets you make informed decisions on machine maintenance by telling you approximately how many hours of use you can expect from an engine, transmission, or hydraulic pump. This information can be used to preempt catastrophic downtime by servicing major components at about 80 percent of their life cycle. Preventive Maintenance (PM) agreements—give you a fixed cost for maintaining a machine for a given period of time. They also help you avoid downtime by ensuring that critical maintenance work gets done right and on schedule. On-site preventive maintenance service performed where and when you need it helps protect you from the expense of catastrophic failures and lets you avoid waste-disposal hassles. Extended coverage—gives you a fixed cost for machine repairs for a given period of time so you can effectively manage costs. Whether you work in a severe-service setting or just want to spread the risk of doing business, this is a great way to custom-fit coverage for your operation. And an extend...
Эта инструкция также подходит к моделям:Эскаваторы - 17ZTS (279.43 kb)
Эскаваторы - 27C ZTS (279.43 kb)
Эскаваторы - 50C ZTS (279.43 kb)