Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
by clothes), the appliance switches off automatically and the speed lights flash red for 5 seconds. 1 Turn the epilating discs with your thumb until you can remove whatever blocks the epilating discs. Cleaning and maintenance Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance. Always keep the adapter dry. Never rinse it under the tap or immerse it in water. If necessary, clean the adapter with the cleaning brush or a dry cloth. Cleaning the epilator and attachments Clean the epilating head after each wet use to ensure optimum performance. Always switch off the appliance before you clean it. appliance (2). 1 Switch off the appliance. 2 Remove the cap from the epilating head. 3 Press the release button (1) and remove the epilating head from the Note: Never try to detach the epilating discs from the epilating head. 4 Remove loose hairs with the cleaning brush. EnglisH 15 5 Rinse all parts (epilator, epilating head and caps) under a lukewarm tap while turning them. 6 Shake excess water off the parts and let them dry. Note: For hygienic reasons, make sure all parts are dry before you reassemble the appliance. 7 To reattach the epilating head, place it on the appliance and press it onto the appliance until it snaps home. Cleaning the shaving head and the comb 1 2 3 Remove the comb, if attached, by pulling it off the shaving head. Press the release button (1) and remove the shaving head from the appliance (2). Remove the shaving unit from the shaving head. 16 EnglisH 4 Rinse the shaving unit, the shaving head and the comb under a lukewarm tap while turning them. 5 Shake the shaving unit, the shaving head and the comb firmly and let them dry. Note: Do not exert any pressure on the shaving unit to avoid damage. 6 Reattach the shaving unit to the shaving head. Note: Make sure all parts are dry before you place them back on the appliance. Tip: Rub a drop of sewing machine oil onto the shaving unit twice a year to extend the lifetime of the cutting element. storage -Store the epilator and the accessories in the pouch. -Put the comb on the shaving head to prevent damage. Note: Make sure that all parts are dry when you store them. EnglisH 17 Travel lock The epilator has an integrated travel lock which prevents the appliance from accidentally being switched on during travel. 1 To activate the travel lock, press and hold the on/off button for 3 seconds until the speed lights flash white 2 times. The epilator starts running and stops immediately when the travel , lock activates. 2 To deactivate the travel lock, press and hold the on/off button for 3 seconds until the speed lights flash white 2 times. Note:You can also insert the appliance plug into the inlet socket and the adapter into a wall socket to deactivate the travel lock. Ordering accessories To purchase accessories for this appliance, please visit our online shop at If the online shop is not available in your countr y, go to your Philips dealer or a Philips ser vice centre. If you have any difficulties obtaining accessories for your appliance, please contact the Philips Consumer Care Centre in your countr y.You find its contact details in the worldwide guarantee leaflet. shaving head If you use the shaving head two or more times a week, we advise you to replace the shaving unit after one or two years or when it is damaged. Environment -Do not throw away the epilator with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preser ve the environment. 18 EnglisH Epilator -The built-in rechargeable batteries of the epilator contain substances that may pollute the environment. Always remove the batteries before you discard and hand in the epilator at an official collection point. Dispose of the batteries at an official collection point for batteries. If you have trouble removing the batteries, you can also take the appliance to a Philips ser vice centre.The staff of this centre will remove the batteries for you and will dispose of them in an environmentally safe way. removing the rechargeable batteries 1 2 Disconnect the epilator from the adapter. Let the epilator operate until the batteries are completely empty and you can no longer switch on the epilator. Remove the epilating head and open the appliance with a screwdriver. 3 Insert the screwdriver into the small slot in the printed circuit board (1).Turn around the screwdriver until the connection between the printed board and the batteries breaks off (2). 4 Pry the batteries out of the appliance with the screwdriver. Caution: Be careful, the battery strips are sharp. Do not try to reassemble the appliance in order to connect it to the mains.This is dangerous. guarantee and service If you need ser vice or information or if you have a problem, please visit the Philips website at or contact the Philips Consumer ...