Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today. Preparing for use Freezing the ice gel pad -Read these instructions carefully before you use the cooling glove (Fig. 2). Keep the ice gel pad out of the reach of children (Fig. ). Do not use a damaged ice gel pad (Fig. ). Do not use the ice gel pad if you are hypersensitive to cold. 1 Put the ice gel pad without the cooling glove in the freezer or freezing compartment (***) at least hours before you start to epilate. (Fig. 5) Make sure the outside of the ice gel pad is completely dr y before you freeze it. Tip:You can store the ice gel pad in the freezer permanently. using the appliance general information about epilation -Epilation is easier just after a bath or shower. Make sure your skin is completely dr y when you star t to epilate. -When you use the appliance for the first time, we advise you to tr y it out on an area with only light hair growth.This helps you get accustomed to the epilation process. EnglisH -For optimal epilation results, the hairs should not be longer than 10mm. Use one of the following methods if the hairs are longer than 10mm: 1 Shor ten the hairs to a maximum length of 10mm with a trimmer. Afterwards you can immediately star t with epilation. 2 Shave the hairs completely.Then you can star t to epilate after a few days (minimum hair length 0.5mm necessar y). -Your skin may become a little red and irritated the first few times you use the epilator.This phenomenon is absolutely normal and quickly disappears. As you use the appliance more often, your skin gets used to epilation, skin irritation decreases and regrowth becomes thinner and softer. If the irritation has not disappeared within three days, we advise you to consult a doctor. -We advise you to epilate before you go to bed at night, as this allows any skin irritation that may develop to diminish overnight. Epilating with the cooling glove Make sure your skin is clean, entirely dr y and free from grease. Do not use any cream before you star t to epilate. 1 Insert the appliance plug into the bottom of the appliance and put the adapter in the wall socket. Put the ice gel pad in the compartment of the cooling glove with the transparent cover (Fig. 6). Only use the ice gel pad in combination with the cooling glove. Push your hand into the cooling glove and start cooling the area you want to epilate (Fig. 7). Do not leave the cooling glove on the same area for more than minutes. Select the desired speed to switch on the appliance (Fig. ). -Select speed 1 for areas with little hair growth and for areas where bones are located directly beneath the skin, such as knees and ankles. -Select speed 2 for larger areas with stronger hair growth. 10 EnglisH 5 6 Stretch your skin with your free hand to make the hairs stand upright. For optimal results, place the appliance perpendicularly onto the skin with the on/off slide pointing forward. Move the appliance against the direction of hair growth at a moderate speed (Fig. 9). Make sure both the epilating discs and the massaging element are in proper contact with the skin. Make sure your skin is completely dry when you start to epilate. 7 Press the appliance lightly onto the skin. If you are not completely satisfied with the epilation result, tr y moving the epilator more slowly over your skin. Epilating without cooling glove If you do not want to use the cooling glove, for instance because you have grown accustomed to the sensation of epilation, you can also use the appliance without the cooling glove. 1 For optimal results, place the appliance perpendicularly onto the skin with the on/off slide pointing forward.Then move the appliance against the direction of hair growth at a moderate speed (Fig. 9). using the peeling glove Use the peeling glove in the shower. Regular massages with the peeling glove may help to prevent ingrown hairs. Do not use the body puff immediately before or after epilation. cleaning and maintenance Never rinse the adapter or the appliance itself with water. Do not use any corrosive detergents, scouring pads or cloths, petrol, acetone etc. to clean the appliance. cleaning the cooling glove 1 Make sure the appliance is switched off and unplugged. EnglisH 11 Remove the ice gel pad from the cooling glove. Clean the cooling glove with a moist cloth after each use. Make sure the outside of the ice gel pad is completely dr y before you freeze it again. cleaning the epilating head 1 Make sure the appliance is switched off and unplugged. Remove the epilating head (Fig. 10). Press the release button (1) and pull the epilating head off the appliance (2). 5 Clean the epilating head, including the epilating discs and the plastic housing, with the cleaning brush (Fig. 11). For thorough cleaning, you can remove the massaging element (Fig. 1 ). You can also rinse the epilating head (not the appliance!) under the tap to clean it more thoroug...
Эта инструкция также подходит к моделям:Эпиляторы - HP6481/02 (534.77 kb)