Оценок - 2, средний балл: 2.5
(
)
)
|
Фрагмент инструкции
. . . . . . . . . . . . . . . . . . . . . . . . . .go to page 1.1 • Experienced User . . . . . . . . . . . . . . . . . . . . .go to page 2.1 • Expert user . . . . . . . . . . . . . . . . . . . . . . . . . .go to page 2.1 Installers: • Installation . . . . . . . . . . . . . . . . . . . . . . . . . .go to page 2.1 • Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .go to page 2.3 Watlow Controls 1241 Bundy Blvd., P.O. Box 5580, Winona, Minnesota USA 55987-5580 Phone: (507) 454-5300, Fax: (507) 452-4507 97 TOTAL CUSTOMER SATISFACTION 3 Year Warranty ISO 9001 Registered Company Winona, Minnesota USA 0600-0001-0000 Rev C Made in the U.S.A. February 1999 $10 Supersedes 0600-0001-0000 Rev B Recycled Paper At Least 10% Postconsumer Waste NOTE: Details of a “Note” appear here in the narrow margin on the left side of each page. cCAUTION: Details of a “Caution” appear here in the narrow margin on the left side of each page. OWARNING: Details of a “Warning” appear here in the narrow margin on the left side of each page. Safety Information We use note, caution and warning symbols throughout this book to draw your attention to important operational and safety information. A bold text “NOTE” marks a short message in the margin to alert you to an important detail. A bold text “CAUTION” safety alert appears with information that is important for protecting your equipment and performance. Be especially careful to read and follow all cautions that apply to your application. A bold text “WARNING” safety alert appears with information that is important for protecting you, others and equipment from damage. Pay very close attention to all warnings that apply to your application. The safety alert symbol, c, (an exclamation point in a triangle) precedes a general CAUTION or WARNING statement. The electrical hazard symbol, O, (a lightning bolt in a triangle) precedes an electric shock hazard CAUTION or WARNING safety statement. Technical Assistance If you encounter a problem with your Watlow controller, review all of your configuration information for each step of the setup, to verify that your selections are consistent with your applications. If the problem persists after checking the above, you can get technical assistance from your local Watlow representative, or by dialing (507) 454-5300. An applications engineer will discuss your application with you. Please have the following information available when calling: • Complete model number • All configuration information • User’s Manual • Diagnostic Menu readings Your Feedback Your comments or suggestions on this manual are welcome, please send them to: Technical Writer, Watlow Controls, 1241 Bundy Blvd., P.O. Box 5580, Winona, MN 55987-5580, Phone: (507) 454-5300, Fax: (507) 452-4507. The Series 93 User’s Manual is copyrighted by Watlow Winona, Inc., © February 1999, with all rights reserved. (1638) How to Use This Manual Watlow Series 93 TC Table of Contents TC Table of Contents 1 General Description ................................................ 1.1 Chapter 2: Install And Wire The Series 93 .................... 2.1 Panel Cutout ............................................................2.1 Dimensions ..............................................................2.1 Installation Procedure ..............................................2.1 Wiring the Series 93 ................................................2.3 Power Wiring............................................................2.3 Sensor Installation Guidelines .................................2.4 Input Wiring .............................................................2.4 Output 1 Wiring ...................................................... 2.6 Output 2 Wiring ...................................................... 2.8 System Wiring Example .......................................... 2.9 Chapter 3: How To Use The Keys And Displays ............ 3.1 Keys, Displays and Indicator Lights ........................ 3.1 Chapter 4: How To Set Up The Series 93 ...................... 4.1 Setting the Input Type DIP Switch .......................... 4.1 Entering Setup Menu .............................................. 4.2 Setup Parameters ................................................... 4.3 Setup Menu Table ................................................... 4.5 Operation Parameters ............................................. 4.6 Operation Menu Table ............................................. 4.7 Chapter 5: How To Tune And Operate ........................... 5.1 Autotuning .............................................................. 5.1 Manual Tuning ........................................................ 5.2 Manual and Automatic Operation ............................ 5.3 Using Alarms .......................................................... 5.4 Error Code Messages ............................................. 5.5 Error Code Actions ...................................................5.6...