Оценок - 5, средний балл: 4.4
(
)
)
|
Фрагмент инструкции
Turn the appliance upside-down on a soft surface, to avoid ruining the paintwork. Insert the feet as shown in the figure 1, making sure they are inserted completely: the teeth A at the bottom must be coupled to the feet. Finally, fasten the feet using the two screws. A A FIG. 1 3. CONNECTION The heater must be connected to a properly polarized A/C 110/120 V household outlet in perfect working conditions. Keep loose clothing or bedding, furniture and flammable material away from the wall outlet where the heater plug is fitted in. 4. FAN HEATER CONTROLS: thermostat dial FIG. 2 These two As the appliance cycles between leds indicate the different powers when it is in the selected use, these two leds indicate the power power the appliance is using. 5. OPERATION AND USE By pressing the “ON/OFF Power selection” button (Fig. 2) one or more times, the appliance will select the operating heating power (see chart below). Each time you push the "ON/OFF" button an acoustic signal will be heard. Note: It is possible to remove the acoustic signal by pressing the "ON/OFF" button for almost 3 seconds when you plug the appliance in. If you want to restore it, do the same thing. P max (maximum power) P med (medium power) P min (minimum power) off If “P max” maximum appliance operating power has been selected, adjust the thermostat dial (Fig. 2) to the desired comfort temperature, from 42°F ( ) and 95°F (5°C and 35°C). °C °F 5 42 10 50 15 59 20 68 25 77 30 86 35 95 room temperature If the selected temperature is higher than the actual room temperature, the appliance will start automatically and rapidly heat the room until it reaches the selected temperature. The unit will automatically mantain the temperature at a constant level, by cycling between “max” (fig. 2), “med” and “min”, as it approaches the selected comfort temperature. If the room temperature exceeds the selected temperature level, the appliance will switch off. Selected Power MAX MAX MAX MAX Power used MAX MED MIN OFF The appliance will switch on automatically again when the room temperature falls below the selected temperature level. If a power level below “P max” has been selected using the “ON/OFF” button, the appliance will modulate between the selected level and the lower power levels. 6. ANTIFREEZE FUNCTION Press the ON/OFF button to select the "P-max" power level. Set the thermostat dial to the " " position (fig. 2). When set in this way, the appliance will switch on automatically only if the room temperature falls below 42°F (5°C), to prevent it from freezing, at minimum energy consumption. This function is not guaranteed in the event of blackouts, even if lasting just a few seconds. 7. MAINTENANCE • Before cleaning, turn off heater, unplug from outlet and allow heater to cool. • DO NOT immerse cord, plug or heater in water or other liquid or pour water or other liquid over heater (see IMPORTANT SAFEGUARD). • To clean dust and lint from air openings, disconnect the heater electric cord from the wall outlet. Use the crevice tool hose attachment of a household vacuum cleaner to remove dust and lint from air openings. To clean, pass the vacuum cleaner attachment along the grill surface. Dust the appliance with a soft, dry cloth. Never use abrasive powders or solvents. Should the appliance fail to work properly do not attempt to carry out repairs as there may be a risk of fire or electric shocks. Always contact the nearest authorized Service Center (see attached list of Service Centers). Limited Warranty factory or authorized service centers, of any defective part or parts thereof other than parts damaged in workmanship. Our obligation under this warranty is limited to replacement or repair, free of charge at our What DoesThis Warranty Cover? We warrant each appliance to be free from defects in material and transit, which shall be returned to us, transportation prepaid. This warranty shall apply only if the appliance is used in accordance with the factory directions which accompany it, and on an Alternating Current (AC) circuit. How Long Does The Coverage Last? This warranty runs for one year from the date of delivery and applies only to the original purchaser for use. What Does This Warranty Not Cover? This warranty does not cover defects or damage of the appliance which result from repairs or alterations to the appliance outside our factory or authorized service centers, nor shall it apply to any appliance which has been subject to abuse, misuse, negligence or accidents. Also, consequential and incidental damages resulting from the use of this product or arising out of any breach of contract or breach of this warranty are not recoverable under this warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. How Do You Get Service? If repairs become necessary or spare parts are needed, please write to: De’ Longhi America Inc. Park 80 West Plaza One 4 th floor Saddle Broo...