Войти:
Оценок - 2, средний балл: 4.5 ( )

Инструкция по эксплуатации Bionaire, модель 1Touch BCH4830-CN

Производитель: Bionaire
Размер: 258.71 kb
Название файла: BCH4830-CN_43_7176212.pdf
Язык инструкции:enfr
Перейти к скачиванию



Фрагмент инструкции


2. 3. 4. 5. 6. 7. 8. 9. 10. 11. e gasoline, paint, or flammable liquids are used or stored. 12.Use appliance only for intended household use as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons. The use of attachments not recommended or sold by the manufacturer may cause hazards. 13.DO NOT use outdoors. AUTO SAFETY SHUT-OFF WITH INSTANT TIP OVER PROTECTION This heater is equipped with a patented, technologically- advanced safety system that requires the user to reset the heater if there is a potential overheat situation. When a potential overheat temperature is reached, the system will automatically shut the heater off. It can only resume operation when the user resets the unit. For specific reset instructions please refer to the unit. To Reset the Heater: If the unit shuts down: 1. Unplug the unit. 2. Wait 30 minutes for the unit to cool down. 3. Plug in and operate normally. NOTE:To shut unit OFF, hold Mode/Off button down for 2 seconds. Tip-Over Shut-Off: When the unit is accidentally knocked over, it will instantly shut off. To reset, simply place the heater in an upright position. Press Mode/Off button and operate normally. PRE-OPERATING INSTRUCTIONS 1. Carefully remove your heater from the box. please save the carton for off-season storage. 2. Make sure the unit is in the OFF position before plugging the heater into the outlet. 3. Place heater on firm level surface. 4. Avoid overloading your circuit by not using other high wattage appliances in the same outlet. At 1500 watts, this unit draws 12.5 Amps. NOTE:The power light will remain lit while heater is plugged in. OPERATING INSTRUCTIONS Your heater is equipped with a technologically advanced 1TouchTM electronic thermostat. You can set the heater to run continuously in manual mode or set the 1TouchTM Thermostat to your desired temperature setting. The 1TouchTM thermostat will automatically turn the heater ON or OFF depending on the preset comfort level. The comfort level ranges between 60° and 80° Fahrenheit. Read instructions before operating. Retain for future reference. Instruction Leaflet INFO-LINE If after having read this leaflet, you have any questions or comments on your heater, call 1-800-253-2764 in North America. 126461/9100020009151 Oscillating Twin Ceramic Heater MODELBCH4830-CN BCH4830-CN_08EFM1.qxd :126461/9100020009151 5/14/08 10:54 AM Page 1 AUTO SAFETY SHUT-OFF WITH INSTANT TIP OVER PROTECTION This heater is equipped with a patented, technologically- advanced safety system that requires the user to reset the heater if there is a potential overheat situation. When a potential overheat temperature is reached, the system will automatically shut the heater off. It can only resume operation when the user resets the unit. For specific reset instructions please refer to the unit. To Reset the Heater: If the unit shuts down: 1. Unplug the unit. 2. Wait 30 minutes for the unit to cool down. 3. Plug in and operate normally. NOTE:To shut unit OFF, hold Mode/Off button down for 2 seconds. Tip-Over Shut-Off: When the unit is accidentally knocked over, it will instantly shut off. To reset, simply place the heater in an upright position. Press Mode/Off button and operate normally. PRE-OPERATING INSTRUCTIONS 1. Carefully remove your heater from the box. please save the carton for off-season storage. 2. Make sure the unit is in the OFF position before plugging the heater into the outlet. 3. Place heater on firm level surface. 4. Avoid overloading your circuit by not using other high wattage appliances in the same outlet. At 1500 watts, this unit draws 12.5 Amps. NOTE:The power light will remain lit while heater is plugged in. OPERATING INSTRUCTIONS Your heater is equipped with a technologically advanced 1TouchTM electronic thermostat. You can set the heater to run continuously in manual mode or set the 1TouchTM Thermostat to your desired temperature setting. The 1TouchTM thermostat will automatically turn the heater ON or OFF depending on the preset comfort level. The comfort level ranges between 60° and 80° Fahrenheit. Read instructions before operating. Retain for future reference. Instruction Leaflet INFO-LINE If after having read this leaflet, you have any questions or comments on your heater, call 1-800-253-2764 in North America. 126461/9100020009151 Oscillating Twin Ceramic Heater MODELBCH4830-CN BCH4830-CN_08EFM1.qxd :126461/9100020009151 5/14/08 10:54 AM Page 1 If your heater fails to operate: • UNPLUG THE UNIT. • Make sure the electrical outlet or circuit breaker is working. • Check for obstructions. If you find an obstruction turn the heater OFF, and follow the Reset Instructions in the manual. Carefully remove the obstruction. • The temperature might be set too low. Press the Mode/Off button until the heater restarts. If your heater fails to oscillate: • Make sure the oscillation button is pressed. • Make sure nothing is wedged between base and body. Please D...

Эта инструкция также подходит к моделям:
Электрообогреватели - 1Touch BCH4830CN08EFM1 (258.71 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории