Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
12. To disconnect the heater, first turn controls to the OFF position, then grip the plug and pull it from the wall outlet. Never pull by the cord. 13. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater. 14. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surface, like a bed, where openings may become blocked. 15. A heater has hot and arcing or sparking parts inside. Do not use it in the areas where gasoline, paint, or flammable liquids are used or stored. 16. Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons. 17. The output of this heater may vary and its temperature may become intense enough to burn exposed skin. Use of this heater is not recommended for persons with reduced sensitivity to heat or an inability to react to avoid burns. 18.SAVE THESE INSTRUCTIONS OPERATING INSTRUCTIONS Your Honeywell® Quick Heat™ heater is designed to heat you warmer, faster!* • Plug in unit. • Turn the Thermostat fully clockwise to the SUPER setting (Fig. 1). • When the room reaches a comfortable temperature, slowly turn the Thermostat counter-clockwise until the heater goes off. This is the point at which the Thermostat setting equals the room temperature. At this setting, Fig. 1 the Thermostat will automatically turn the heater on and off to maintain this selected temperature. • UNPLUG the unit to turn the power OFF. The plug light will go off. SAFETY FEATURES This heater is equipped with several devices and features for added protection. • A high temperature safety control prevents overheating (HI limit). • A back-up thermal circuit breaker. • This heater is also equipped with a motor thermal fuse that will shut down the motor should it operate at a higher than normal temperature. • This heater was created using a high quality safety plastic. TROUBLESHOOTING If your heater shuts off unexpectedly or fails to operate, one of the above-mentioned safety features may have been activated to prevent overheating. • Be sure the power cord is plugged into a working electrical outlet. • Check your Thermostat setting. The unit may simply be off because you have reached your desired heat setting. • Check for any obstructions. If you find an obstruction, turn the heater OFF and unplug it. • Allow the heater to cool completely, then remove the obstruction. Wait at least 10 minutes, then re-plug in the heater and follow the OPERATING INSTRUCTIONS for your unit. TROUBLESHOOTING (continued) NOTE: IF YOU EXPERIENCE A PROBLEM, PLEASE RETURN THE HEATER TO THE PLACE OF ORIGINAL PURCHASE OR SEE YOUR WARRANTY. DO NOT ATTEMPT TO OPEN THE HEATER YOURSELF. DOING SO MAY VOID YOUR WARRANTY AND CAUSE DAMAGE TO THE HEATER OR PERSONAL INJURY. IF YOU HAVE ANY QUESTIONS REGARDING THIS HEATER, PLEASE CALL OR WRITE: Mail questions and comments to: ...
Эта инструкция также подходит к моделям:Электрообогреватели - HZ-315 (276.54 kb)
Электрообогреватели - HZ-316C (276.54 kb)
Электрообогреватели - HZ-316 (276.54 kb)