Оценок - 5, средний балл: 4.2
(
)
)
|
Фрагмент инструкции
2. Place the oil radiator, with the base uppermost, on a soft surface, for example a carpet. 3. Place a mounting bracket 8 under the heater element so that the parts with a screw thread project upwards. 4. Lay a roller railer 9 over it, such that the screw threads protrude through the holes. Check to ensure that the recesses on the roller railers 9 face outwards. The screw ends projecting from the appliance must reach into the recesses. 5. Screw one wing nut 0 onto each of the threaded ends of the mounting bracket 8 until it is hand tight. 6. Proceed in the same manner with the other side. 7. Turn the appliance over and place it on the rollers. - 3 Commissioning 1. Unwind all of the power cable from the power cable retainer 7. Note: Ensure that the thermostat 3 and the heat level switch 2 are standing at MIN resp. 0. 2. Insert the power plug into a wall power socket. 3. Place the heat level switch 2 at “III” and the thermostat 3 at MAX. The control lamp “Power” 1 glows. Important: With the heat level switch 2 you can regulate how quickly the appliance warms up. If you wish to heat it up particularly quickly, select heat level “III”, if a slow warming up is preferred, select heat level “I”. Using the thermostat 3 you can set it to the desired temperature. 4. When the desired room temperature has been reached, slowly turn the thermostat 3 back until a quiet “click” is heard and the control lamp “Power” 1 extinguishes. The momentary room temperature will now be retained. It could be that every now and then the control lamp “Power” 1 switches itself on and then back off. This means that the programmed room temperature had fallen below this level for a short period and the appliance had warmed itself back up. Note: If you want to heat a room up particularly quickly, activate additionally the warm air switch 4. When the warm air switch 4 is positioned at ON, the warm air control lamp 4 glows and warm air is blown through the warm air outlet 5 into the room. 5. If you wish to switch the appliance off, first place the warm air switch 4 at the position OFF. Next, turn the heat level switch 2 to “0” and then the thermostat 3 to MIN. 6. Remove the plug from the wall power socket. Frost protection function You can programme this oil radiator so that, if the room temperature falls near to 0°C, it switches itself on and begins to radiate heat automatically: 1. Insert the power plug into a wall socket. 2. Position the heat level switch 2 at “I”, “II” or “III”, and the thermostat 3 at MIN. The oil radiator will now switch itself on if the temperature falls near to 0°C. When the temperature rises above 0°C, the oil radiator switches itself off automatically. The oil radiator will switch on and off periodically to maintain the room temperature above 0°C. Cleaning and care Injury hazard Allow the appliance to cool down before cleaning it! Risk of Burns! Remove the power plug from the wall socket. There is a risk of electric shock! Clean the appliance with a lightly moist cloth. For stubborn soiling use a mild detergent on the cloth. Attention! Do not use any aggressive, abrasive or chemical cleaning agents. These could damage the surfaces. - 4 Storage If you do not intend to use the appliance for a long period, clean it as described in the section “Cleaning and care”. Wrap the power cable around the power cable retainer 7. Store the appliance at a clean and dry location. Disposal Do not dispose of the appliance in your normal domestic waste. This product is subject to the European guideline 2002/96/EC. Dispose of the appliance through an approved disposal centre or at your community waste facility. Observe the currently applicable regulations for waste oil disposal. In case of doubt, please contact your waste disposal centre. Note: The guidelines regarding the scrapping of the appliance must be strictly followed! Enquire at your local waste disposal facility. Dispose of all packaging materials in an environmentally friendly manner. Warranty and Service The warranty for this appliance is for 3 years from the date of purchase. The appliance has been manufactured with care and meticulously examined before delivery. Please retain your receipt as proof of purchase. In the event of a warranty claim, please make contact by telephone with our Service Department. Only in this way can a post-free despatch for your goods be assured. The warranty covers only claims for material and maufacturing defects, but not for transport damage, for wearing parts or for damage to fragile components, e.g. buttons or batteries. This product is for private use only and is not intended for commercial use. The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. Your statutory rights are not restricted in any way by this warranty. The warranty period will not be extended by repairs made under warranty. This applies also to replaced and repaired parts. Any damag...