Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
Once the desired room temperature is achieved, turn the Thermostat Control towards FROST WATCH until the fan cycles off. The heat will now cycle On/Off to maintain a comfortable level. • To use as a fan without heat, move the knob to FAN ONLY and the Thermostat Control toward Hot until the fan begins to operate. No heating will occur in this mode. • The oscillation feature functions in any power or mode setting. • Press the oscillation button to toggle this feature on and off. 5 Vt-1742.qxd 25.05.04 10:30 Page 12 ENGLISH • Press the foot switch to ready for operation. Then, the room select knob must be switch on to activate the heater. • Press the foot switch to turn the heater off and then the pilot light will be off. SPECIAL FEATURES • This unit is equipped with a Safety Auto-Off, plus a safety Thermal Fuse. If the unit experiences excessive heat, the Safety Auto-Off will shut the unit off. If this happens, move the knob to Off immediately. Be sure the front and back grilles are not blocked and nothing is restricting airflow. Unplug the unit, let it cool down, and wait 10 minutes before plugging it back in to operate. Readjust your temperature or room settings. If the unit fails to operate after 10 minutes, it may mean the heater has internal damage and that the Thermal Fuse has been tripped so the heater can no longer operate. • The Motion Off Detection Feature will cut the power if the unit falls over in any direction or is lift (such as if you move it to another part of the room). The Tip-Over Switch will cut the power if the unit is knocked over forward or backward (for example, if a pet accidentally tips it over). Both are controlled by the Tip Over Switch on the bottom of the unit. Do not attempt to defeat this safety feature. • The power indicator shows that the heater is switched on and operating. It continues to glow even if the thermostat has cycled and the heating elements are off. Note that even though this unit has a Cool-Touch Flousing, both the front and back grilles will get hot. Be careful not to touch them. FROST WATCH FEATURE • Frost Watch: When the heater is plugged in and the Power Indicator is on, you can select any setting for room size and leave the Thermostat Control on the FROST WATCFI or lowest setting. Your unitwill remain Off unless the temperature drops below (4°C). If this happens, Frost Watch will automatically cycle the heater/ fan On. 6 РУССКИЙ • Во избежание перегрузки в электрической сети или срабатывания сетевого автоматического предохранителя следите, чтобы к розетке, в которую включен данный тепловентилятор, не подключались другие электроприборы с большой мощностью потребления. • Не забывайте отключать тепловентилятор от электрической сети, если он не используется. • Следует применять тепловентилятор только в соответствии с настоящей инструкцией, иначе это может привести к возникновению пожара, поражению электрическим током или к травмам. СОХРАНИТЕ ДАННУЮ ИНСТРУКЦИЮ ИСПОЛЬЗОВАНИЕ • Да...