Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
MEET YOUR READER
CHARGE YOUR READER
READ
1. Power on your computer and
All books in the Reader can be found under the [Books] on the [Home]
connect your Reader with the
screen. Tap on the book title to open and swipe the touchscreen to turn a
supplied USB cable. Do not put
page.
your computer in sleep mode while
charging. Wait until the [USB
Below are a few examples of your Reader’s many convenient features and
connected] screen appears on your
Charge/Busy indicator
Reader.
Connect to your computer
applications for your reading pleasure. For more details, refer to the User
Guide in your Reader under [Books] on the [Home] screen.
2. The Charge/Busy indicator will light up in red while charging. It may
take up to 2.5 hours to fully charge. You can use the Reader while
Bookmark
Zoom in and out
charging by pressing the (Home) button, or tap the on-screen [Data
Touchscreen
Transfer Mode] icon allowing your computer to recognize your Reader
for data transfer. In either way, it may extend the time to fully charge the
battery.
3. The Charge/Busy indicator will turn off automatically after the battery is
fully charged. Disconnect the USB cable from your Reader.
Quick Start Guide
Page Turn
Notes
Guide de démarrage
Home
Tap right top corner of page.
Pinch out and in on the
It takes up to 5 minutes for the Reader to turn on when charging a completely
depleted battery via your computer. Until the Reader becomes ready, the Charge/
touchscreen.
Back
Busy indicator may blink in red 3 times when the (Power) button is pressed. For
Menu
an immediate usage while charging, the AC adapter PRSA-AC10 or PRSA-AC1A
Dictionary
Google or Wikipedia search
(sold separately) is recommended.
microSD slot
To keep the battery charge, disconnect the USB cable from the Reader if the
computer is in sleep mode or powered off.
TIPS FOR SAVING BATTERY POWER
Sleep Mode
To save battery power and prevent unintentional operation of the
Tap and hold a word for 2
Look up a word in the dictionary
There are two instruction guides provided for your reference. Please
touchscreen, put the Reader in sleep mode by pressing the (Power)
seconds and release.
and tap Google or Wikipedia.
review this Quick Start Guide. For more detailed information, the User
button. To wake the Reader, press the (Power) button again.
Guide can be found in [Books] on the [Home] screen of your Reader™.
Charge/Busy indicator
Shutdown/Power Off Mode
Font choices and size
Handwriting
Deux guides d’utilisation vous sont fournis à titre de référence. Veuillez
Power
consulter ce Guide de démarrage. Pour plus d’informations, vous
(Press to turn on/off)
If the Reader will not be used for a prolonged period, it is recommended to
shut it down. When the Reader is on, press and hold the (Power) button
trouverez le Guide de l’utilisateur sous [Livres] sur l’écran [Accueil] de
Headphone jack
for 3 seconds. Tap [Yes] on the screen. To restart the Reader, press the
votre Reader™.
Micro USB connector
(Power) button.
RESET button
Automatic Power Saving Modes
The stylus packaged with the Reader may be used for more convenient
The Reader will enter sleep mode after 10 minutes of inactivity. After 3 days
touchscreen operation.
in sleep mode, the Reader will shut down/power off automatically. The
Push (Menu) button, tap [Font]
Push (Menu) button, tap
The [Home] screen has 2 pages. To navigate [Home] screen pages, press
automatic power saving modes cannot be turned off.
and tap your choice.
[Handwriting] and draw.
either of the (Page Turn) buttons or tap either of the on-screen page icons
[ ] [ ].
©2011 Sony Corporation / Printed in China
Set up a Wi-Fi® network connection with these simple steps.
Download new releases, best sellers, magazines and newspapers.
JOIN A Wi-Fi® NETWORK
SHOP AT THE READER STORE
Your Reader must be configured to connect to a Wi-Fi network for a
CASE A: A WPS-compatible Wi-Fi router with WPS button
CASE D: Connecting to an available Wi-Fi network
[Reader Store] application may be found on the Home screen. The initial
wireless Internet access.
setting of the country/region of your Reader will determine if the Reader™
INTERNET
Note: Make sure that your Reader shows the [Wi-Fi Settings] screen.
Note: Make sure that your Reader shows the [Wi-Fi Settings] screen.
Store is available in your area.
Otherwise, follow the steps under COMMON INSTRUCTIONS first.
Otherwise, follow the steps under COMMON INSTRUCTIONS first.
1. Tap [WPS Push-Button Configuration].
Tap [Reader Store] icon and follow the on-screen instructions to purchase
INTERNET
Check if the available Wi-Fi network requires a username and a password.
and download the content of your choice.
2. Tap [Start].
A password may be also called a WEP key/WPA key/encryption key/
3. Press the WPS button on your Wi-Fi router within 2 minutes.
network key, or similar.
4. After your Reader screen shows the setup completion, tap [OK].
1. Tap [Scan] to show a list of all available Wi-Fi networks.
2. Find and tap your Wi-Fi network SSID (Service Set Identifier) in the [Wi-
CASE B: A WPS-compatible Wi-Fi router with PIN Input
Fi Networks] list.
Note: Make sure that your Reader shows the [Wi-Fi Settings] screen.
3. If prompted for a password, tap the input area and type in the
Otherwise, follow the steps under COMMON INSTRUCTIONS first.
password using the on-screen keyboard.
1. Tap [Add Wi-Fi Network].
4. Tap [Connect].
The following questions will determine the most suitable case for setting
2. Tap [WPS PIN Method].
5. The [Browser] application may start automatically. Otherwise, start the
your Reader for a Wi-Fi network connection.
3. Tap [Start]. A PIN (Personal Identification Number) will be shown on the
browser application manually; press the (Home) button, tap [ ] or
NO
press the (Page Turn) button and tap [Browser].
1. Are you using a home Wi-Fi connection?
Case D
screen of your Reader.
4. Enter the PIN into your Wi-Fi router. Please refer to your Wi-Fi router’s
6. The browser screen may show further information to complete the
YES
instruction manual for further details.
connection. Follow any instruction(s) where applicable.
NO
5. After entering the PIN tap [OK]. Your Wi-Fi router’s SSID (Service Set
Purchased content is stored under either [Books] or [Periodicals] on the
2. Is your Wi-Fi router WPS* compatible?
Case C
Manually setting a Wi-Fi connection
Identifier) appears in the [Wi-Fi Networks] list on the [Wi-Fi Settings]
Home screen.
Note: Make sure that your Reader shows the [Wi-Fi Settings] screen.
YES
screen.
Note
6. Tap your Wi-Fi router’s SSID and tap [Connect].
Otherwise, follow the your Wi-Fi router’s COMMON INSTRUCTIONS first.
NO
The Reader Store image shown here may differ from the actual one.
3. Does your Wi-Fi router have a WPS button?
Case B
1. Tap [Add Wi-Fi Network].
CASE C: Connecting to a Wi-Fi router without WPS support
2. Tap [Manual Registration].
Shop using your computer
YES
Note: Make sure that your Reader shows the [Wi-Fi Settings] screen.
3. Tap the [SSID] input area and type in using the on-screen keyboard.
(Where there is no access to a Wi-Fi network connection)
* WPS: Wi-Fi Protected Setup
Otherwise, follow the steps under COMMON INSTRUCTIONS first.
4. Tap the [Security Method] menu (default value is [Open]) and tap the
You can access the Reader Store from your computer.
Case A
supported security type.
Install either Reader™ for PC or Reader™ for Mac® by launching the installer
Check if the Wi-Fi router to be connected requires a password. A password
5. Tap [Save].
on your Reader while it is connected to your computer by the supplied USB
First, follow the COMMON INSTRUCTIONS below, then refer to your
may also be called a WEP key/WPA key/encryption key/network key, or
cable and your Reader is set in data transfer mode.
case for further instructions.
similar.
6. Tap the saved network SSID in the [Wi-Fi Networks] list on the [Wi-Fi
An Internet connection is required to your computer.
1. Tap [Scan] to show a list of all available Wi-Fi networks.
Settings] screen.
Your personal content can be transferred onto your Reader via the Reader
COMMON INSTRUCTIONS
2. Find and tap your Wi-Fi router’s SSID (Service Set Identifier) in the [Wi-
7. If prompted for a password, tap the input area and type in the
software.
1. Tap [Wireless Network Settings] under [Settings] on the second page
Fi Networks] list.
password using the on-screen keyboard.
For details on how to install the software, refer to the User Guide.
of the [Home] screen on your Reader.
3. If prompted for a password, tap the input area and type in the
8. Tap [Connect].
2. Confirm [Wi-Fi] has its check mark. Otherwise, turn on Wi-Fi by tapping
password using on-screen keyboard.
[Wi-Fi].
4. Tap [Connect].
3. Tap [Wi-Fi Settings] to show the [Wi-Fi Settings] screen.
...