Оценок - 4, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Anritsu’s obligation covers repairing or replacing products which prove to be defective during the warranty period. Buyers shall prepay transportation charges for equipment returned to Anritsu for warranty repairs. Obligation is limited to the original purchaser. Anritsu is not liable for consequential damages. LIMITATION OF WARRANTY The foregoing warranty does not apply to Anritsu connectors that have failed due to normal wear. Also, the warranty does not apply to defects resulting from improper or inadequate maintenance by the Buyer, unauthorized modification or misuse, or operation outside of the environmental specifications of the product. No other warranty is expressed or implied, and the remedies provided herein are the Buyer’s sole and exclusive remedies. TRADEMARK ACKNOWLEDGEMENTS Adobe Acrobat is a registered trademark of Adobe Systems Incorporated. NOTICE Anritsu Company has prepared this manual for use by Anritsu Company personnel and customers as a guide for the proper installation, operation, and maintenance of Anritsu Company equipment and computor programs. The drawings, specifications, and information contained herein are the property of Anritsu Company, and any unauthorized use or disclosure of these drawings, specifications, and information is prohibited; they shall not be reproduced, copied, or used in whole or in part as the basis for manufacture or sale of the equipment or software programs without the prior writtten consent of Anritsu Company. Safety Symbols To prevent the risk of personal injury or loss related to equipment malfunction, Anritsu Company uses the following symbols to indicate safety-related information. For your own safety, please read the information carefully BEFORE operating the equipment. WARNING WARNING indicates a hazard. It calls attention to a procedure that could result in personal injury or loss of life if not performed properly. Do not proceed beyond a WARNING notice until the indicated conditions are fully understood and met. CAUTION CAUTION indicates a hazard. It calls attention to a procedure which, if not performed properly, could result in damage to or destruction of a component of the instrument. Do not proceed beyond a CAUTION note until the indicated conditions are fully understood and met. The instrument is marked with this symbol to indicate that it is necessary for the user to refer to the instructions in the operation manual. Indicates ground. Indicates heavy weight equipment. 681XXC OM Safety-1 For Safety WARNING When supplying power to this equipment, always use a three-wire power cable connected to a three-wire power line outlet. If power is supplied without grounding the equipment in this manner, there is a risk of receiving a severe or fatal electric shock. WARNING Before changing the fuse, always remove the power cord from the power outlet. There is the risk of receiving a fatal electric shock if the fuse is replaced with the power cord connected. Always use a new fuse of the type and rating specified by the fuse markings on the rear panel of the instrument. WARNING There are no operator serviceable components inside. Refer servicing of the instrument to qualified service technicians. To prevent the risk of electrical shock or damage to precision components, do not remove the equipment covers. WARNING Use two or more people to lift and move this equipment, or use an equipment cart. There is a risk of back injury, if this equipment is lifted by one person. WARNING If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired. Safety-2 681XXC OM Table of Contents Chapter 1 General Information 1-1 SCOPEOFMANUAL.................1-3 1-2 INTRODUCTION...................1-3 1-3 DESCRIPTION....................1-3 1-4 IDENTIFICATIONNUMBER ............1-5 1-5 ELECTRONICMANUAL...............1-5 1-6 RELATEDMANUALS ................1-5 GPIBProgrammingManual ...........1-5 SCPIProgrammingManual ...........1-5 MaintenanceManual ..............1-6 1-7 OPTIONS.......................1-6 1-8 PERFORMANCE SPECIFICATIONS ........1-7 1-9 RECOMMENDED TEST EQUIPMENT .......1-8 Chapter 2 Installation 2-1 INTRODUCTION...................2-3 2-2 INITIALINSPECTION................2-3 2-3 PREPARATIONFORUSE..............2-4 PowerRequirements...............2-4 LineVoltageSelection..............2-4 PowerConnection................2-4 StandbyOperation................2-5 WarmupTime..................2-6 OperatingEnvironment.............2-6 2-4 GPIB SETUP AND INTERCONNECTION .....2-7 InterfaceConnector ...............2-7 CableLengthRestrictions ............2-7 GPIBInterconnection ..............2-7 SettingtheGPIBAddress ............2-7 Selecting the Line Terminator ..........2-9 Selecting the Interface Language.........2-9 2-5 RACK MOUNTING KIT INSTALLATION ..... 2-10 Preliminary ..................2-10 Procedure ...................2-10 681XXC OM Table of Contents (Continued) 2-6 PREPARATION FOR STORAGE/SHIPMENT . . . 2...