Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
To reduce the risk of death or injury by electric shock: 1. Always unplug appliance from electrical outlet immediately after using (except when charging unit). 2. Do not place or store appliance where it could fall or be pulled into a tub or sink. 3. Do not use appliance while bathing or in the shower. 4. Do not place appliance in, or drop into, water or other liquid. 5. If appliance has fallen into water, do not reach for it. Unplug immediately. 6. Unplug this appliance before cleaning. Do not reach into the water warning–To reduce the risk of burns, electric shock, fire, or injury to persons: 1. Never leave a plugged-in appliance unattended. 2. This appliance should not be used by, on or near children or individuals with certain disabilities. 3. Use appliance only for its intended use as described in this manual. Only use attachments recommended by the manufacturer. Do not use an extension cord to operate the appliance. 4. Never operate the appliance if it has a damaged cord or plug, is not working properly, has been dropped or damaged, or dropped into water. Return the appliance to a Conair service center for examination and repair. 5. Keep the appliance cord away from heated surfaces. 6. Do not pull, twist or wrap the cord around the appliance. 7. Never drop or insert any object into any opening of the appliance. 8. Do not place the appliance on any surface while it is operating. 9. Do not use the appliance with a damaged or broken comb or with teeth missing from the blades, as injury may result. Before each use, make certain the blades are aligned properly and oiled. 10. Do not use the appliance outdoors or where aerosol (spray) products are being used or oxygen is being administered. 11. This product is for household use only. The adaptor complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) the adaptor may not cause harmful interference, and (2) the adaptor must accept any interference received, including intereference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Save These instructions Troubleshooting If your cord/cordless, rechargeable trimmer does not seem to be taking a charge, take the following troubleshooting steps before returning it for repair: 1. Be sure the electrical outlet is working by plugging in another appliance to test it. 2. Make sure the electrical plug is not connected to a switch which turns power off when lights are turned off. 3. Be sure you have inserted the trimmer properly into the charging stand, that all connections are secure, and that the trimmer switch is in the “OFF” position. CHARG ING THE TR IMMER Before using the trimmer for the first time, make sure trimmer is in the off position and charge for 2 hours. The charging cord should already come plugged into the stand (Fig. 1). 1. Plug the adaptor into the AC outlet. 2. Place the trimmer in the stand. 3. When fully charged, you will be able to use the trimmer for up to 30 minutes. USING DIRECT PLUG -IN Plug the end of the line cord into the trimmer and plug adaptor into an AC outlet (Fig. 2). (If the battery is very weak, wait about 1 minute, then turn on trimmer). Us er maintenance instructions Taking Care of Your Trimmer Oi ling the Blades About once a month you should oil the trimmer blades with the oil provided in your kit. It is best to do this over a piece of newspaper. Turn the trimmer on and hold it so that the blades are pointed downward. Spread one drop of oil across the blades, then turn the trimmer off and wipe away the excess oil with a soft cloth. Be careful not to use too much oil and don’t oil your trimmer more than necessary, as that could damage the motor. (Never attempt to oil the motor bearing, as it is permanently lubricated.) After oiling the blades, return the trimmer and oil packet to the trimmer storage base. Keep oil away from children. Blade Care Because the trimmer blades are precision-made for a very special use, they should always be handled with care. Each time you finish using the trimmer, take the cleaning brush provided and brush away any loose hair that has collected in the blades. Then store the trimmer in its recharging storage base to protect the blades until the next use. Be especially careful when changing or adjusting blades. When you have your trimmer serviced, be sure that both blades are sharpened or replaced at the same time. To promote the long life of the appliance, use your trimmer only for the purpose intended by the manufacturer—to trim your beard and mustache. REPLACEMENT (REMOVAL ) OF BLADE SET To remove blade set from your trimmer, make sure the trimmer is in the OFF position. Remove the blade set by placing thumb against the smaller cutter and pushing forward, releasing the cutter assembly from the trimmer housing. Replace with new cutting system and reverse the remo...