Оценок - 6, средний балл: 4.3 ( )

Производитель: Philips Norelco Размер: 580.6 kb Название файла: 7120x_11_dfu_aen.pdf Язык инструкции:

Press the Razor Head Release Button, flip open the Razor Head Assembly. Clean inside razor heads and hair chamber by running under hot water. Clean outside of Razor Head Assembly by running under hot water. Close the Razor Head Assembly and shake off excess water. 16 ENGLISH C 6 Open Razor Head assembly again and leave open to air dry. NOTE: Do not wipe or dry the shaving heads with a towel or tissue.This could damage the shaving heads. C 7 If the shaving unit becomes detached from the razor, you can easily reattach it. 8 You may also clean the hair chamber without water by using the supplied brush. Once A Month: Razor Heads Do not mix up the cutters and combs as the shaving performance may be adversely affected for several weeks before optimal shaving performance is restored. 1 Turn razor OFF, remove the charging plug from the outlet and cord from the razor. C 2 Press the razor head release button to open the razor head assembly. C 3 Turn the wheel counterclockwise (1) and remove the retaining frame (2). ENGLISH 17 C 4 Remove and clean one set of cutters and combs at a time. C 5 Separate the cutter from the comb and rinse clean under hot water. Do not clean more than one cutter and comb at a time, since they are all matching sets. If you accidentally interchange the cutters and combs, it could take several weeks before optimal shaving performance is restored. C 6 Replace the set back into the Razor Head Assembly so that the “wings” on the comb fit within the brackets located towards the center of the Assembly. The set will only fit into the Razor Head Assembly if the ‘wings’ are between the brackets. Make sure that the two pointy edges of the head fit exactly into the recesses. 7 Repeat the process for the other two sets of cutters and combs. 8 Replace the frame. C 9 Press down (1) and turn wheel clockwise (2) until it locks into place. 10 Close the Razor Head Assembly. 18 ENGLISH Once A Month: Razor Heads C C For optimum performance, razor cutters and combs should be cleaned in a degreasing liquid (e.g. Philips Norelco Razor Cleaner, model RC1776, or rubbing alcohol) and lubricated with Philips Norelco Razor Lubricant, model AL80, or one drop of mineral oil (in the center of the head). This helps prevent wear of the shaving heads. After Each Use: Trimmer Turn razor OFF. Push down spring-release trimmer switch. Clean trimmer with the brush every time you use it. Lubricate the trimmer teeth with Philips Norelco Razor Lubricant (model AL80) or with one drop of mineral oil every 6 months. 5 Close trimmer by pressing trimmer down. 1 2 3 4 This razor has no other user-serviceable parts. Any other service should be performed by the Philips Norelco Service Location. ENGLISH 19 . Be sure razor is turned off. Remove cord from outlet and razor before storing in a safe, dry location where it will not be crushed, banged, or subject to damage. Storage . Do not wrap cord around razor when storing. . Store cord in a safe location where it will not be cut or damaged. . Do not keep razor permanently plugged into outlet. . Do not place or store razor where it can fall or be pulled into a tub or sink, water or other liquid while plugged in. C . Put the Protective Razor Head Cap on razor to protect heads. Assistance . For assistance, call toll free: 1-800-243-3050 or visit our website: . Information is available 24 hours a day, 7 days a week. 20 ENGLISH . Replacement Heads Model HQ8 - For maximum razor performance, replace your Philips Norelco razor heads once a year. . Razor Cleaner RC1776 - Philips Norelco Razor Cleaner. . Razor Lubricant AL80 - Philips Norelco Razor Lubricant. . Car Cord Adaptor Cable HQ8010 - Charges razor from a 12V battery in your car, truck, van, boat or camper. . Philips Norelco Razor Accessories may be purchased at a store near you, or on our website Accessories ENGLISH 21 FULL TWO YEAR WARRANTY Philips Electronics North America Corporation warrants 7115X, 7120X, 7125X ( except cutters and combs) against defects in materials or workmanship period of two years from the date of purchase, and agrees to repair without charge. IMPORTANT: This war...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: