Оценок - 3, средний балл: 5
(
)
)
|
Фрагмент инструкции
2-17 FRANCAIS.................................................. 18-33 ESPANOL.................................................... 34-49 DEUTSCH.................................................. 50-65 ITALIANO.................................................. 66-81 PORTUGUES............................................. 82-97 ENGLISH Congratulations on your purchase of a BUSHNELL® DNS Pro wrist top compass. It is a precision instrument constructed of the finest materials and assembled by highly skilled craftsmen for a lifetime of trouble-free use under the most demanding conditions. This booklet will help you achieve optimum performance by explaining how to use its various features. WHAT THE BUTTONS MEAN (1) ADJ Adjusts your settings. (2) MODE Changes display from one feature to the next within the time or compass modes. (3) ALTI Accesses ALTIMETER function from Time Function. (4) LIGHT Turns map light on. (5) COMP/+ Switches from Time Mode to Compass Mode. Also increases adjustment settings. (6) BARO/Accesses BAROMETER and WEATHER FORECASTING feature from TIME Mode. Also decreases settings while in adjustment modes. LCD Display (1) (3) (4) (6) (5) Compass Level (2) 23 SETTING THE TIME Default Time Mode / Time Settings Press MODE button until Time Mode is displayed. Press and hold down ADJ for 3 seconds. Press COMP/+ or BARO/-button until desired value appears, and then press MODE button for next setting. Press ADJ button at any time to save changes and exit. When this is done, seconds will be reset to 00. A small "A" or "P" will be to the lower left of the hours to denote AM or PM. New Settings Date Settings When setting the date, the year is also displayed. Press MODE button until Time Mode is displayed. Press and hold down ADJ for 3 seconds. Press MODE button and scroll to desired setting to change. Press COMP/+ or BARO/-button until desired value appears, and then press MODE button for next setting. Press ADJ button at any time to save changes and exit. For 24/12 hour setting press MODE button until Time Mode is displayed. Press and hold down ADJ for 3 seconds. Press MODE button and scroll through settings until 24/12 hour setting appears, then press COMP/+ or BARO/-button to enter desired setting. Press ADJ button at any time to save changes and exit. ALARM Alarm Setting Mode Press MODE button until Alarm Mode is displayed. The alarm consists of 5 alarms, 3 for Time 1 for Altitude, and 1 for Temperature. Press COMP/+ or BARO/-button to scroll through the different alarms. Press and hold down ADJ for 3 seconds until the minute blinks, press COMP/+ or BARO/-button to adjust to desired values. Press MODE button for next setting. Press ADJ button at any time to save changes and exit. The alarm is activated automatically after adjustments have been made. To stop the alarm from beeping, press any button. The alarm can also be turned on or off by going to the relevant alarm and pressing the ALTI button to activate alarm function, press again to activate Snooze function, and press again to de-activate alarm. Temperature Alarm Sets the alarm to sound when the temperature measurement reaches the programmed level. In the Alarm Mode, the Temperature alarm uses the same measurement units (.C or F) that were last set in the Temperature Mode. To change this you must first change the temperature units in the Barometer Mode. Pressing the COMP/+ or BARO/-once changes the temperature in tenths of a degree. Holding the button down changes the temperature in increments of 1 degree. 4 5 Altitude Alarm Sets the alarm to sound when the altitude reaches the programmed level. In the Alarm Mode, the Altitude alarm uses the same measurement units that were last set in the Altimeter Mode. To change this you must first change it in the Altimeter Mode. To adjust the altitude at which the alarm will go off, press ADJ to enter the setting mode. Press COMP/+ or BARO/-to change the altitude alarm setting. Press ADJ to save and exit. Beep Function In the Alarm Mode a Beep function is also available. When activated, the Beep function causes a beep sound to be made whenever a button is depressed, even when the Alarm function is turned off. To activate the function go to the Beep function in the Alarm Mode, press the ALTI button and ‘ON’ is displayed. Press again and ‘OFF’ is displayed. Stopwatch Mode Press MODE button until Stop Watch Mode is displayed. To operate, press COMP/+ button to start and press again to stop. Pressing BARO/-button will reset the Stop Watch. Stop Watch Mode / Split Timing Function For split timing function, press the BARO/-button while the Stop Watch is operating in order to stop the display and press again to continue. The display will show your time down to 1/100th of a second. You can also press the BARO/-button while the Stop Watch is operating to stop the display and then press the COMP/+ button to stop the Stop Watch and display the final reading. Press the BARO/-button again to reset the Stop Watch. Split timi...